Skip to content

General Ability Test 2018 (I)

Set A

Questions 101–120 of 150

101Physics • Heat and Thermodynamics • Specific Heat and Calorimetry
Easy

Which of the following statements about specific heat of a body is/are correct ?

1
It depends upon mass and shape of the body
2
It is independent of mass and shape of the body
3
It depends only upon the temperature of the body

Select the correct answer using the code given below :

Options
Show answer & solution

Option D

2 only

Why

1 — Incorrect. Specific heat is the heat needed per unit mass, so the mass is divided out; shape plays no part. 2 — Correct. Specific heat depends on the material, not on the mass or shape of the body. 3 — Incorrect. It depends mainly on the material. It changes a little with temperature, but not 'only' with temperature.

Exam-hall approach

Statements 1 and 2 contradict each other, and specific heat is defined per unit mass, so 2 is true. That strikes A and C. The word 'only' in statement 3 makes it false, which leaves D.

Proof

NCERT Class 11 Physics, Thermal Properties of Matter (specific heat capacity)

About the other options

Option A

Contains 1, which describes heat capacity, the quantity that does depend on mass.

Option B

Contains 3: specific heat does vary a little with temperature, but it depends on the material first, not only on temperature.

Option C

Contains 1 and 3, both false.

Ideal time: about 41 s
102Physics • Oscillations, Waves and Sound • Oscillations and the Simple Pendulum
Easy

Which one of the following is an example of the force of gravity of the earth acting on a vibrating pendulum bob ?

Options
Show answer & solution

Option C

Restoring force

Why

When the bob is pulled to one side, part of its weight acts along its path towards the lowest point. This pull always brings the bob back to its mean position, so it is a restoring force.

Proof

NCERT Class 11 Physics, Oscillations (the simple pendulum): the restoring force is

About the other options

Option A

An applied force is a push or pull given by an outside agent, such as a hand. Gravity here is not that.

Option B

Friction, such as air resistance, opposes the motion and slows the bob. It is not the earth's pull.

Option D

Virtual force is not a real force on the bob. Gravity is a real force.

Ideal time: about 20 s
103Physics • Light and Optics • Refraction and Total Internal Reflection
Easy

Which one of the following statements about the refractive index of a material medium with respect to air is correct ?

Options
Show answer & solution

Option D

It is always greater than one

Why

The refractive index of a medium with respect to air is the speed of light in air divided by its speed in the medium. Light travels slower in every material medium than in air, so the ratio is always greater than one.

Proof

NCERT Class 10 Science, Light – Reflection and Refraction:

About the other options

Option A

A ratio of two speeds is always positive at school level, never negative.

Option B

Zero would mean light moves infinitely fast in the medium, which is impossible.

Option C

Unity holds only for air itself. Glass, water and diamond have values of about 1.5, 1.33 and 2.42.

Ideal time: about 25 s
104Physics • Magnetism and Electromagnetism • Bar Magnet and Magnetic Field
Moderate

Which one of the following statements about magnetic field lines is NOT correct ?

Options
Show answer & solution

Option D

There are no field lines within a bar magnet

Why

Magnetic field lines are closed loops. Outside a bar magnet they run from north to south, and inside the magnet they run from south to north. So field lines do exist inside a bar magnet, and D is false. A is also false. A field line cannot start from a point, because there are no single magnetic poles. D is keyed because it contradicts a direct textbook line; A is equally wrong, so this question has two false statements, and A deserves the same credit.

Proof

NCERT Class 10 Science, Magnetic Effects of Electric Current (field lines are closed curves); NCERT Class 12 Physics, Magnetism and Matter

About the other options

Option A

Also defensible

Also false: magnetic field lines form closed loops and never start or end at a point, since there are no isolated poles. This is defensible as the key too.

Option B

True: two field lines never cross, or the field would point two ways at one place.

Option C

True: near the ends of two pole pieces the lines always bend outwards a little, so they cannot be perfectly straight.

Ideal time: about 46 s
105Physics • Light and Optics • Refraction by Lenses
Easy

Two convex lenses with power 2 dioptre are kept in contact with each other. The focal length of the combined lens system is

Options
Show answer & solution

Option D

0.25 m

Why

Powers of thin lenses in contact add: . The focal length in metres is .

Exam-hall approach

Two converging lenses together focus more strongly than one. One D lens has m, so the pair must be under m. That strikes B and C.

Proof

D, so m

About the other options

Option A

Would need a power of D, five times one lens. No simple slip gives it.

Option B

Takes one lens's D as a focal length of m: forgets both the second lens and .

Option C

Takes the total power D as the focal length: forgets to invert, .

Ideal time: about 35 s
106Chemistry • Periodic Classification of Elements • s-Block Elements
Easy

Which one of the following alkali metals has lowest melting point ?

Options
Show answer & solution

Option D

Caesium

Why

Melting points of the alkali metals fall down the group, because the atoms get bigger and the metallic bonding gets weaker. Of the four, caesium is lowest down, and it melts at about 28.5 degrees Celsius.

Proof

NCERT Class 11 Chemistry, The s-Block Elements (physical properties of alkali metals)

About the other options

Option A

Sodium is highest up of the four, so it has the highest melting point, about 98 degrees Celsius.

Option B

Potassium melts at about 63 degrees Celsius, higher than rubidium and caesium.

Option C

Rubidium melts at about 39 degrees Celsius, just above caesium.

Ideal time: about 13 s
107Physics • Modern and Nuclear Physics • Nuclear Fission and Fusion
Easy

Which one of the following metals is alloyed with sodium to transfer heat in a nuclear reactor ?

Options
Show answer & solution

Option A

Potassium

Why

Liquid sodium is used as a coolant to carry heat out of fast breeder reactors. Alloyed with potassium, it forms NaK, which stays liquid even at room temperature.

Exam-hall approach

A coolant alloy must stay liquid, so it needs a metal with a low melting point. Potassium is sodium's neighbour in group 1 and melts even lower. Calcium, magnesium and strontium are group 2 metals with high melting points.

Proof

NCERT Class 11 Chemistry, The s-Block Elements (liquid sodium as a reactor coolant)

About the other options

Option B

Calcium is a group 2 metal with a high melting point; it is used in alloys and cement, not reactor coolants.

Option C

Magnesium is used in light alloys for aircraft, not as a liquid coolant.

Option D

Strontium is known for the red colour of fireworks, not for coolants.

Ideal time: about 15 s
108Physics • Modern and Nuclear Physics • Photons and Dual Nature of Radiation
Easy

Which one of the following metals is used in the filaments of photo-electric cells that convert light energy into electric energy ?

Options
Show answer & solution

Option C

Rubidium

Why

Photoelectric cells need a metal that gives off electrons when visible light falls on it. Alkali metals such as rubidium and caesium lose their outer electron most easily, so visible light is enough.

Exam-hall approach

The word 'filaments' suggests tungsten, but that fact is about light bulbs. A photoelectric cell needs a metal that loses electrons easily, and only rubidium is an alkali metal here.

Proof

NCERT Class 12 Physics, Dual Nature of Radiation and Matter (alkali metals respond to visible light)

About the other options

Option A

Tungsten is used in the filaments of electric bulbs because of its very high melting point.

Option B

Copper is used for electric wires because it conducts well; visible light does not free its electrons.

Option D

Aluminium is used in overhead power cables; visible light does not free its electrons.

Ideal time: about 17 s
109Geography • Earth's Interior, Plate Tectonics, Earthquakes and Volcanoes • Plate Tectonics and Plate Boundaries
Easy

Which of the following statements about Ring of Fire is/are correct ?

1
It is a zone of convergence plate boundaries
2
It is an active seismic and volcanic zone
3
It is associated with deep trench

Select the correct answer using the code given below :

Options
Show answer & solution

Option D

1, 2 and 3

Why

1 — Correct. The Ring of Fire runs along convergent plate boundaries around the Pacific Ocean, where ocean plates sink under others. 2 — Correct. It holds most of the world's active volcanoes and earthquakes. 3 — Correct. The sinking plates form deep ocean trenches, such as the Mariana Trench.

Exam-hall approach

Statement 2 is the best-known fact about the Ring of Fire, which strikes C. Only D holds all three, so if trenches and convergence both seem right, D is the answer.

Proof

NCERT Class 11 Geography, Fundamentals of Physical Geography, Distribution of Oceans and Continents (plate boundaries)

About the other options

Option A

Leaves out 3: the Ring of Fire is lined with deep trenches.

Option B

Leaves out 1: the Ring of Fire follows convergent plate boundaries.

Option C

Leaves out 2 and 3, both true.

Ideal time: about 43 s
110Geography • Soils and Natural Vegetation of India • Forest Types of India
Moderate

Which one of the following Himalayan vegetation species is found between the altitudes of 1800 to 2600 metres ?

Options
Show answer & solution

Option D

Deodar

Why

In the Himalayas, vegetation changes with height. Sal grows in the foothills, chir pine on the lower slopes, deodar at about 1,800 to 2,600 metres, and spruce and silver fir higher up.

Exam-hall approach

Sal is a tree of the plains and foothills, which strikes A. Chir pine grows below the temperate conifers. That leaves deodar or spruce, a two-way guess worth taking under the one-third penalty.

Proof

NCERT Class 11 Geography, India: Physical Environment, Natural Vegetation (montane forests)

About the other options

Option A

Sal: a tropical deciduous tree of the foothills and plains, below about 1,000 metres.

Option B

Chir: a pine of the lower Himalayan slopes, below the deodar zone.

Option C

Spruce: a conifer of the higher temperate zone, mostly above the deodar belt.

Ideal time: about 18 s
111Geography • Rivers and Drainage of India • Peninsular Rivers: East- and West-Flowing
Easy

Which one of the following rivers is NOT a tributary of river Cauvery ?

Options
Show answer & solution

Option C

Indravati

Why

The Indravati is a tributary of the Godavari. It flows through Odisha and the Bastar region of Chhattisgarh. Hemavati, Arkavati and Amaravati all join the Cauvery.

Exam-hall approach

Indravati is the one name on NCERT's list of Godavari tributaries. Knowing that alone settles it.

Proof

NCERT Class 11 Geography, India: Physical Environment, Drainage System (the Godavari and Cauvery basins)

About the other options

Option A

Hemavati: a tributary of the Cauvery in Karnataka.

Option B

Arkavati: a tributary of the Cauvery near Bengaluru.

Option D

Amaravati: a tributary of the Cauvery in Tamil Nadu.

Ideal time: about 14 s
112Geography • Agriculture in India • Major Crops and Cropping Seasons
Easy

Which of the following conditions is/are essential for tea cultivation ?

1
Tropical and sub-tropical climate
2
Heavy rainfall ranging from 150 cm to 250 cm
3
Soil should contain good amount of lime

Select the correct answer using the code given below :

Options
Show answer & solution

Option B

1 and 2 only

Why

1 — Correct. Tea grows well in tropical and sub-tropical climates. 2 — Correct. Tea needs heavy rainfall, about 150 to 250 cm, spread through the year. 3 — Incorrect. Tea needs acidic, well-drained soil rich in humus. Lime makes soil alkaline, which tea does not tolerate.

Exam-hall approach

Tea grows on rainy hill slopes like Assam and Darjeeling, so 2 is true, which strikes D. Statement 3 is the one to doubt: tea needs acidic soil, and lime does the opposite. That strikes A and C.

Proof

NCERT Class 10 Geography, Contemporary India II, Agriculture (tea)

About the other options

Option A

Contains 3: tea needs acidic soil, and lime would harm it.

Option C

Contains 3 and leaves out 1.

Option D

Leaves out 2: heavy rainfall is essential for tea.

Ideal time: about 42 s
113Economy • Infrastructure
Easy

Bharatmala Project is related to

Options
Show answer & solution

Option A

Improving road connectivity

Why

Bharatmala Pariyojana is a programme to build national highways, including economic corridors, border roads and roads to ports. The Union Cabinet approved Phase I, about 34,800 km of highways, on 24 October 2017.

Proof

Press Information Bureau, Cabinet approval of Bharatmala Pariyojana Phase-I, 24 October 2017

About the other options

Option B

Linking ports to the hinterland is the aim of Sagarmala, Bharatmala's sister programme for ports.

Option C

River interlinking is the National River Linking Project, such as the Ken–Betwa link.

Option D

The gas pipeline linking eastern cities is Pradhan Mantri Urja Ganga.

Ideal time: about 12 s
114Geography • Atmosphere, Weather and Climate • Winds, Pressure Belts and the Coriolis Force
Easy

Which one of the following is a local wind that blows out from Siberia ?

Options
Show answer & solution

Option B

Purga

Why

The purga is a cold, snow-laden wind that blows over the tundra of Siberia, in northern Russia.

Proof

Standard GK books, local winds of the world (Purga: Siberia)

About the other options

Option A

Bora: a cold, dry wind blowing down to the Adriatic coast of Croatia.

Option C

Mistral: a cold wind blowing down the Rhone valley to the south coast of France.

Option D

Blizzard: a general name for a snowstorm with strong cold winds in polar regions, not a named local wind of Siberia.

Ideal time: about 14 s
115Geography • Industries of India • Iron and Steel Industry
Easy

Which one of the following centres is NOT known for iron and steel industry ?

Options
Show answer & solution

Option D

Renukoot

Why

Renukoot in Uttar Pradesh is known for aluminium. Hindalco's aluminium smelter is there. Bhadravati, Salem and Visakhapatnam all have steel plants.

Proof

NCERT Class 12 Geography, India: People and Economy, Manufacturing Industries (iron and steel; aluminium smelting)

About the other options

Option A

Bhadravati (Karnataka): Visvesvaraya Iron and Steel Plant.

Option B

Salem (Tamil Nadu): Salem Steel Plant of SAIL, known for stainless steel.

Option C

Visakhapatnam (Andhra Pradesh): Visakhapatnam Steel Plant, India's first shore-based steel plant.

Ideal time: about 14 s
116Geography • Minerals and Energy Resources of India • Power Generation: Thermal, Hydro and Nuclear
Easy

Which of the following are essential prerequisites for establishment of a thermal power station ?

1
Availability of fossil fuels
2
Proximity to a river, lake or sea
3
Good transport network
4
Proximity to an urban centre

Select the correct answer using the code given below :

Options
Show answer & solution

Option A

1, 2 and 3

Why

1 — Essential. A thermal plant burns coal, oil or gas, so it needs a fuel supply. 2 — Essential. It needs a large, steady supply of water to make steam and to cool it again. 3 — Essential. Coal comes in bulk, so it needs good rail or road links. 4 — Not essential. Electricity can be sent long distances on transmission lines, so the plant need not be near a city.

Exam-hall approach

Fuel is plainly essential, which strikes B and C. A thermal plant boils water to make steam, so it needs a water source, which strikes D.

Proof

NCERT Class 12 Geography, India: People and Economy, Mineral and Energy Resources (thermal power)

About the other options

Option B

Contains 4: power travels on the grid, so being near a city is not essential, and it leaves out fuel.

Option C

Leaves out 1: without coal, oil or gas there is nothing to burn.

Option D

Leaves out 2: a thermal plant cannot run without water for steam and cooling.

Ideal time: about 50 s
117Indian Art and Culture • Festivals, Fairs and Cultural Events
Moderate

Which of the following statements about ‘Aadi Mahotsav’ held recently in New Delhi is/are correct ?

1
The theme of the festival was ‘A Celebration of the Spirit of Tribal Culture, Cuisine and Commerce’
2
The festival was organized by the Ministry of Tourism, Government of India

Select the correct answer using the code given below :

Options
Show answer & solution

Option A

1 only

Why

1 — Correct. The theme of Aadi Mahotsav 2017 was A Celebration of the Spirit of Tribal Culture, Cuisine and Commerce. 2 — Incorrect. It was organised by the Ministry of Tribal Affairs with TRIFED, not by the Ministry of Tourism.

Exam-hall approach

The theme in statement 1 is about tribal culture, which points to the Ministry of Tribal Affairs and makes statement 2 doubtful. That leaves A as the likely answer.

Proof

Aadi Mahotsav, a national tribal festival, was held at Dilli Haat, INA, New Delhi, from 16 to 30 November 2017. It was organised by the Ministry of Tribal Affairs and TRIFED (Press Information Bureau, November 2017).

About the other options

Option B

Contains 2: the Ministry of Tribal Affairs, not Tourism, organised the festival.

Option C

Contains 2, which is false.

Option D

Leaves out 1: the theme is stated correctly.

Ideal time: about 37 s
118Physics • Units, Measurement and Dimensions • SI Units and Standards of Measurement
Very easy

Light year is a unit for measurement of

Options
Show answer & solution

Option D

very large distance

Why

A light year is a distance, not a time. It is the distance light travels in one year, about 9.46 × 10^15 m. It is used for distances between stars.

Proof

NCERT Class 11 Physics, Units and Measurement (measurement of large distances)

About the other options

Option A

The word 'year' tempts, but a light year measures distance, not age or time.

Option B

Very small time intervals use units like the nanosecond or femtosecond.

Option C

Temperature is measured in kelvin or degrees Celsius.

Ideal time: about 12 s
119Physics • Oscillations, Waves and Sound • Transverse and Longitudinal Waves
Easy

Which of the following statements about electromagnetic waves, sound waves and water waves is/are correct ?

1
They exhibit reflection
2
They carry energy
3
They exert pressure
4
They can travel in vacuum

Select the correct answer using the code given below :

Options
Show answer & solution

Option A

1, 2 and 3

Why

1 — Correct. All three kinds of wave reflect: light from a mirror, sound as an echo, water waves from a wall. 2 — Correct. Every wave carries energy from one place to another. 3 — Correct. All three exert pressure: light exerts radiation pressure, sound exerts acoustic pressure, and water waves push on a shore or a wall. 4 — Incorrect. Only electromagnetic waves travel in a vacuum. Sound and water waves need a medium.

Exam-hall approach

Sound cannot travel in a vacuum, so 4 is false; this strikes B. Every wave carries energy, so 2 is true; this strikes C and D. A is left without judging 3.

About the other options

Option B

Contains 4, which is false: sound and water waves need a medium.

Option C

Leaves out 2, which is true: every wave carries energy.

Option D

Leaves out 2 and 3, which are both true.

Ideal time: about 46 s
120Physics • Heat and Thermodynamics • Specific Heat and Calorimetry
Easy

Thermal capacity of a body depends on the

Options
Show answer & solution

Option A

mass of the body only

Why

Thermal capacity is the heat needed to raise a body's temperature by 1 °C. It equals mass × specific heat (C = mc). For a body of a given material, the specific heat is fixed, so the thermal capacity changes only with mass. Shape plays no part. The key is contestable. Strictly, thermal capacity also depends on the material (through c), and no option says so. A is the only option that names no wrong factor.

Exam-hall approach

Shape does not change how much heat a body needs: a lump of iron and an iron wire of the same mass take the same heat. This strikes B and D. Density alone does not fix the mass, which strikes C.

About the other options

Option B

Shape does not matter: the same mass of the same material needs the same heat whatever its shape.

Option C

Density alone does not fix the heat needed. A small and a large body of the same density have very different thermal capacities.

Option D

Includes shape, which plays no part. Temperature changes c only slightly, which school physics ignores.

Ideal time: about 20 s