Skip to content

Elementary Mathematics 2021 (I)

Set A

Questions 61–80 of 100

61Mensuration • Solids
Very easy

A cone and a hemisphere have equal bases and equal volumes. What is the ratio of the height of the cone to the radius of the hemisphere?

Options
Show answer & solution

Option B

Approach

Write both volumes with the same radius and equate.

Step-by-step solution

  1. 1
    Equal bases means both have the same base radius

    Why: The hemisphere's flat face is its base circle, so "equal bases" fixes one common radius.

  2. 2

    Why: Cone volume is a third of base times height; a hemisphere is half a sphere, so .

  3. 3
    , so

    Why: Cancel from both sides.

Shortcut

immediately gives .

Common mistakes

Option A

Cancelled once too often, leaving .

Option C

No pairing of the two volume formulas gives .

Option D

Used for the cone instead of , which gives .

Skills used

Ideal time: about 40 s
62Mensuration • Recasting and Melting
Easy

A solid sphere of diameter mm is melted to stretch into a wire of length cm. What is the diameter of the wire?

Options
Show answer & solution

Option B

cm

Approach

Melting conserves volume: set the sphere's volume equal to the wire's, treating the wire as a long thin cylinder.

Step-by-step solution

  1. 1
    Sphere diameter mm cm, so cm

    Why: The wire's length is in centimetres, so the sphere must be converted before anything is equated.

  2. 2
    Sphere volume cm

    Why: Standard sphere volume with .

  3. 3
    Wire volume

    Why: A stretched wire is a cylinder of length cm and unknown radius ; melting changes the shape, not the volume.

  4. 4
    , so cm and the diameter is cm

    Why: The question asks for the diameter, which is twice the radius.

Shortcut

gives , so the diameter is cm.

Common mistakes

Option A

Stopped at the radius cm instead of doubling it to the diameter.

Option C

No step of the volume equation produces cm.

Option D

No step of the volume equation produces cm; that would need a wire volume four times too large.

Skills used

Ideal time: about 1 min
63Mensuration • Solids • Cylinder
Moderate

The ratio of the radius of base to the height of a cylinder is . If the volume of the cylinder is cm, then what is the curved surface area of the cylinder? (Take )

Options
Show answer & solution

Option C

cm

Approach

Introduce a common factor for the ratio, find it from the volume, then put the dimensions into the curved-surface formula.

Step-by-step solution

  1. 1
    ,

    Why: A ratio fixes the two lengths only up to a common factor; one unknown then carries the whole question.

  2. 2

    Why: Volume of a cylinder is ; substituting in terms of makes it a single cubic equation.

  3. 3
    , so

    Why: and , so the and the cancel and what is left is , a perfect cube.

  4. 4
    cm, cm

    Why: Putting back into and .

  5. 5
    CSA cm

    Why: The cancels against the denominator of , leaving .

Shortcut

Guess (so is clean): then and confirms it; CSA .

Common mistakes

Option A

No combination of the cylinder formulas with these dimensions gives cm.

Option B

Used — half the total surface area — instead of .

Option D

Gave the total surface area cm rather than the curved surface alone.

Skills used

Ideal time: about 2 min
64Mensuration • Solids • Cylinder
Moderate

The difference between the outside and the inside surface area of a cylindrical pipe cm long is cm. The pipe is made of cm of metal. If is the outer radius and is the inner radius of the pipe, then what is equal to? (Take )

Options
Show answer & solution

Option D

cm

Approach

The surface difference gives and the metal volume gives ; dividing one by the other gives .

Step-by-step solution

  1. 1

    Why: The outside and inside surfaces are the curved surfaces of two cylinders of the same length cm.

  2. 2
    cm

    Why: Factor out and divide; .

  3. 3

    Why: The metal occupies the outer cylinder minus the inner one, so its volume is .

  4. 4
    cm

    Why: Factorising the difference of two squares turns the two results straight into the quantity asked for, with no need to find and separately.

Shortcut

, so cm.

Common mistakes

Option A

Halved a second time to , doubling the final quotient to .

Option B

No pairing of the two given quantities produces cm.

Option C

No pairing of the two given quantities produces cm.

Skills used

Ideal time: about 1.5 min
65Mensuration • Recasting and Melting
Easy

A metal solid cube of edge cm is melted and made into three small cubes. If the edges of two small cubes are cm and cm, then what is the surface area of the third small cube?

Options
Show answer & solution

Option C

cm

Approach

Volume is conserved in melting: subtract the two known cubes' volumes from the original to get the third.

Step-by-step solution

  1. 1
    Original volume cm

    Why: A cube of edge has volume .

  2. 2
    and

    Why: The two known small cubes.

  3. 3
    Third volume cm

    Why: Melting and recasting changes shape but not the total volume, so the three small cubes together account for the original.

  4. 4
    Edge cm

    Why: .

  5. 5
    Surface area cm

    Why: A cube has six square faces, and the question asks for surface area, not edge or volume.

Shortcut

, so the surface is cm.

Common mistakes

Option A

Used — three faces instead of six — giving cm.

Option B

No edge arising from the volume subtraction gives a surface of cm.

Option D

No edge arising from the volume subtraction gives a surface of cm.

Skills used

Ideal time: about 1.5 min
66Mensuration • Recasting and Melting
Very easy

A conical vessel whose internal radius is cm and height cm is full of water. The water is emptied into a cylindrical vessel with internal radius cm. What is the height to which the water rises?

Options
Show answer & solution

Option B

cm

Approach

The water keeps its volume: equate the cone's volume with the cylinder's, leaving uncancelled.

Step-by-step solution

  1. 1
    Water volume cm

    Why: The full conical vessel holds a cone of water with , .

  2. 2

    Why: In the cylinder the same water forms a cylinder of radius and unknown height .

  3. 3
    , so cm

    Why: cancels, so its value is never needed.

Shortcut

gives cm.

Common mistakes

Option A

No step of the volume equation gives cm.

Option C

No step of the volume equation gives cm.

Option D

Scaled by the ratio of the radii, , instead of by its square: .

Skills used

Ideal time: about 45 s
67Mensuration • Recasting and Melting
Easy

A metal solid cube of side cm is melted to make a cone of height cm. What is the radius of the base of the cone? (Take )

Options
Show answer & solution

Option C

cm

Approach

Equate the cube's volume with the cone's and solve for .

Step-by-step solution

  1. 1
    Cube volume cm

    Why: Edge cubed.

  2. 2

    Why: The melted metal becomes a cone of height cm, so the volumes are equal.

  3. 3

    Why: , so the whole coefficient collapses to — the clean cancellation the numbers were chosen for.

  4. 4
    , so cm

    Why: .

Shortcut

when , so and cm.

Common mistakes

Option A

Took the computed cm as a diameter and halved it.

Option B

No step of the volume equation produces cm.

Option D

No step of the volume equation produces cm.

Skills used

Ideal time: about 1.5 min
68Mensuration • Solids • Cone
Hard

A cone of height cm has a curved surface area cm. What is the ratio of its radius to slant height? (Take )

Options
Show answer & solution

Option C

Approach

Turn the curved-surface condition into , substitute , and solve the resulting quadratic in .

Step-by-step solution

  1. 1

    Why: Curved surface of a cone is ; with the numbers cancel to something small.

  2. 2

    Why: Radius, height and slant height form a right triangle.

  3. 3

    Why: Squaring lets the Pythagoras relation be substituted, giving one equation in alone.

  4. 4
    with ;

    Why: Split the middle term using and . The negative root is rejected since .

  5. 5
    , and , so

    Why: Both values follow at once; the ratio is what was asked.

Shortcut

and , so the cone is the -- one and .

Common mistakes

Option A

Reached for the -- triple and reported radius to height rather than radius to slant height.

Option B

Assumed the triangle was -- (the -- triple doubled) from the height alone, never checking it against .

Option D

Found but mis-added as , giving .

Skills used

Ideal time: about 2.5 min
69Mensuration • Solids • Cylinder
Moderate

A rectangular paper is cm long and cm wide. Let be the volume of the largest cylinder formed by rolling the paper along its length and be the volume of the largest cylinder formed by rolling the paper along its width. What is the ratio of to ? (Take )

Options
Show answer & solution

Option B

Approach

Each roll makes one side the circumference and the other the height; compute both volumes and compare.

Step-by-step solution

  1. 1
    Rolling along the length: circumference cm, height cm

    Why: Rolling along a side means that side wraps round to close the tube, so it becomes the circumference, and the other side stands as the height.

  2. 2
    , so cm

    Why: Recover the radius from the circumference, then use .

  3. 3
    Rolling along the width: circumference cm, height cm, so

    Why: The two sides exchange roles.

  4. 4
    cm

    Why: Same formula with the new radius and height.

  5. 5

    Why: Halving the radius quarters the base area while only doubling the height, so the wider roll wins by a factor of .

Shortcut

, so the ratio is .

Common mistakes

Option A

Assumed that equal sheets of paper must give equal volumes because the curved surface area is the same either way.

Option C

Read "rolling along its length" as making the length the height rather than the circumference, inverting the ratio.

Option D

No pairing of the two rolls gives .

Skills used

Ideal time: about 1.5 min
70Mensuration • Solids • Sphere
Easy

A hollow spherical shell is made up of a metal of density gcm. If the internal and external radii are cm and cm respectively, then what is the mass of the shell? (Take )

Options
Show answer & solution

Option A

g

Approach

Volume of the shell is the outer sphere minus the inner one; multiply by the density.

Step-by-step solution

  1. 1
    Shell volume

    Why: A hollow shell is the outer solid sphere with the inner sphere removed, so its volume is the difference of the two.

  2. 2

    Why: The cancels against the denominator of , which is why these radii were chosen.

  3. 3
    Volume cm

    Why: Keeping it as a fraction avoids a recurring decimal; the will cancel against the density.

  4. 4
    Mass g

    Why: Density is mass per unit volume, so mass is density times volume; g/cm cancels the denominator exactly.

Shortcut

g — the and the both cancel.

Common mistakes

Option B

No step of the shell calculation produces g.

Option C

No step of the shell calculation produces g.

Option D

No step of the shell calculation produces g.

Skills used

Ideal time: about 1.5 min
71Mensuration • Solids • Cone
Easy

A cloth of m width is used to make a conical tent m in diameter with a slant height of m. What is the length of the cloth? (Take )

Options
Show answer & solution

Option C

m

Approach

The cloth becomes the curved surface of the cone, so find that area and divide by the cloth's width.

Step-by-step solution

  1. 1
    m, m

    Why: The formulas take the radius, and the question prints the diameter.

  2. 2
    Curved surface m

    Why: A tent has no fabric base, so only the curved surface is stitched from cloth.

  3. 3
    m

    Why: The cloth is a rectangle of width m and unknown length, and its area is the area it has to cover.

Common mistakes

Option A

No route reaches m.

Option B

Took the fabric as a rectangle m by m (diameter times slant height), giving m and m.

Option D

Found m correctly but divided by instead of by the width .

Skills used

Ideal time: about 1 min
72Mensuration • Recasting and Melting
Easy

A sphere of diameter cm is dropped into a cylindrical vessel partly filled with water. The radius of the vessel is cm. If the sphere is completely submerged in water, then by how much will the surface level of water be raised?

Options
Show answer & solution

Option B

cm

Approach

The submerged sphere pushes up a cylindrical slab of water of its own volume, so equate the two volumes.

Step-by-step solution

  1. 1
    Sphere: cm, volume cm

    Why: Halve the diameter before cubing, or the volume is out by a factor of .

  2. 2
    Risen water: a cylinder of radius cm and height , volume cm

    Why: The water that rises sits in the same vessel, so it is a slab of the vessel's own cross-section.

  3. 3
    cm

    Why: Nothing is lost, so the displaced volume equals the sphere's volume.

Shortcut

The base areas make the ratio obvious: the sphere's volume over the base area is cm straight away.

Common mistakes

Option A

Used the hemisphere volume instead of the whole sphere's .

Option C

No route reaches cm.

Option D

No route reaches cm.

Skills used

Ideal time: about 1 min
73Mensuration • Plane Figures • Circle
Easy

A sector is cut from a circle of radius cm. If the length of the arc of the sector is cm, then what is the area of the sector?

Options
Show answer & solution

Option A

cm

Approach

Get the sector's central angle from its arc length, then take the same fraction of the circle's area.

Step-by-step solution

  1. 1

    Why: The arc is that fraction of the whole circumference, and here the circumference is cm.

  2. 2
    , so

    Why: Only the fraction is needed, so stop there rather than clearing to degrees.

  3. 3
    Area cm

    Why: The sector is the same fraction of the area as it is of the circumference.

Shortcut

Dividing the two sector formulas kills altogether and leaves area cm.

Common mistakes

Option B

No route reaches cm.

Option C

No route reaches cm.

Option D

No route reaches cm.

Skills used

Ideal time: about 1.5 min
74Mensuration • Plane Figures • Quadrilateral
Easy

A wire is in the form of a circle of radius cm. If it is bent in the form of a rhombus, then what is its side length? (Take )

Options
Show answer & solution

Option D

cm

Approach

Bending a wire changes its shape but not its length, so the rhombus has the circle's circumference as its perimeter.

Step-by-step solution

  1. 1
    Circumference cm

    Why: This is the length of wire available, and it is all that carries over to the new shape.

  2. 2
    Perimeter of the rhombus cm

    Why: The same wire is re-bent with nothing cut off or added, so the total length round the figure is unchanged.

  3. 3
    cm

    Why: All four sides of a rhombus are equal, so the perimeter is four times the side.

Common mistakes

Option A

Treated the given cm as the diameter, getting cm of wire and cm.

Option B

No route reaches cm.

Option C

No route reaches cm.

Skills used

Ideal time: about 50 s
75Mensuration • Plane Figures • Circle
Moderate

If the perimeter of a semicircular park is m, then what is its area? (Take )

Options
Show answer & solution

Option B

m

Approach

The perimeter of a semicircular park is the arc plus the bounding diameter, so solve that for the radius before touching the area.

Step-by-step solution

  1. 1
    Perimeter

    Why: Walking round the park means going along the curved edge and back across the straight edge, so the diameter counts.

  2. 2
    m

    Why: One equation in one unknown; the cancels against to keep the arithmetic whole.

  3. 3
    Area m

    Why: Half a circle has half the circle's area.

Common mistakes

Option A

Halved the semicircle's area a second time, giving m.

Option D

Found m but reported the whole circle's area m instead of half of it.

Option C

No route reaches m.

Skills used

Ideal time: about 1.5 min
76Geometry • Quadrilateral • Trapezium
Moderate

In a trapezium , is parallel to . The diagonals and intersect at . If and , then what is the value of ?

Options
Show answer & solution

Option B

Approach

The diagonals of a trapezium cut each other in the same ratio, so set the two given ratios equal and solve the quadratic.

Step-by-step solution

  1. 1
    and , so

    Why: makes each diagonal a transversal, so the alternate angles at and at are equal.

  2. 2
    , that is

    Why: Corresponding sides of the two similar triangles are in one ratio, and these two pairs are corresponding.

  3. 3

    Why: Cross-multiplying clears both denominators in one move.

  4. 4

    Why: Expand, bring everything to one side and divide through by the common factor .

  5. 5
    or

    Why: Split the middle term: with product .

  6. 6

    Why: makes and negative, and a segment length cannot be negative.

Common mistakes

Option A

Matched the two ratios term by term instead of as ratios, solving to get .

Option C

Factorised , flipping the sign of the constant term, and took .

Option D

No route reaches .

Skills used

Ideal time: about 2 min
77Geometry • Triangle • Similarity
Easy

is similar to . The perimeters of and are cm and cm respectively. What is the ratio of to equal to?

Options
Show answer & solution

Option B

Approach

Every corresponding length in similar triangles scales by the same factor, and the perimeters give that factor directly.

Step-by-step solution

  1. 1

    Why: Perimeters are sums of corresponding sides, so they scale by the side ratio .

  2. 2

    Why: and are both , and adding two fractions with the same value keeps that value.

Common mistakes

Option A

No route reaches .

Option C

No route reaches .

Option D

No route reaches .

Skills used

Ideal time: about 45 s
78Geometry • Triangle • Similarity
Moderate

Two isosceles triangles have equal vertical angles and their areas are in the ratio . What is the ratio of their corresponding heights?

Options
Show answer & solution

Option C

Approach

Equal vertical angles in two isosceles triangles force similarity, so take the square root of the area ratio.

Step-by-step solution

  1. 1
    Each base angle is , the same in both, so the triangles are similar

    Why: An isosceles triangle's shape is fixed by its vertical angle alone, and equal angles give AA similarity.

  2. 2

    Why: Areas of similar figures are in the square of the linear ratio; clearing the decimals keeps the numbers whole.

  3. 3
    , and the heights are in the ratio , so

    Why: and ; corresponding altitudes scale by , not .

Common mistakes

Option A

Took but left the second term unrooted as , pairing with .

Option B

No route reaches .

Option D

Quoted the area ratio itself as the ratio of heights, without taking the square root.

Skills used

Ideal time: about 1.5 min
79Geometry • Triangle • Similarity
Easy

is a triangle right angled at and is perpendicular to . If cm and cm, then what is equal to?

Options
Show answer & solution

Option D

cm

Approach

The altitude to the hypotenuse splits the triangle into two triangles similar to each other, which gives as the geometric mean of and .

Step-by-step solution

  1. 1
    In : ; in :

    Why: splits into and , and has a right angle at .

  2. 2
    and , so

    Why: Two pairs of equal angles are enough; write the vertices in matching order before forming ratios.

  3. 3

    Why: and are the legs of the first triangle, and the corresponding legs of the second.

  4. 4
    cm

    Why: A length is the non-negative root.

Shortcut

is worth remembering outright: gives cm in one line.

Common mistakes

Option A

No route reaches cm.

Option B

No route reaches cm.

Option C

No route reaches cm.

Skills used

Ideal time: about 1 min
80Mensuration • Solids
Moderate

The surface area of a cube is equal to that of a sphere. If is the volume of the cube and is the volume of the sphere, then what is equal to?

Options
Show answer & solution

Option A

Approach

Equate the two surface areas to get the cube's edge in terms of the sphere's radius, then form the ratio of volumes and square it.

Step-by-step solution

  1. 1

    Why: The equal-surface condition is the only link between the two solids, so use it to eliminate one variable.

  2. 2
    ,

    Why: Work with rather than : the surface condition gives cleanly and the cube of it is .

  3. 3

    Why: Squaring first avoids the half-power altogether, which is why the question asks for and not .

  4. 4
    , so

    Why: Cancel and the numerical factors: .

Common mistakes

Option B

Formed instead of , reversing the order the question names.

Option C

Lost a factor of in , which turns into .

Option D

No route reaches .

Skills used

Ideal time: about 2 min