Skip to content

Mathematics 2023 (II)

Set A

Questions 81–100 of 120

81Analytical Geometry • Two Dimensions • Parabola
Very easy

What is the equation of directrix of parabola , where and ?

Options
Show answer & solution

Option B

Approach

Find from the quadratic and the sign condition, then read the directrix of as .

Step-by-step solution

  1. 1
    , so or ; since ,
  2. 2
    : the focus is and the parabola opens to the left.
  3. 3
    Directrix , that is

    Why: The directrix is as far from the vertex as the focus, on the opposite side.

Common mistakes

Option A

Ignores and takes ; then has directrix .

Option C

Takes and also writes the directrix as .

Option D

Writes the directrix as , the line through the focus.

Skills used

Ideal time: about 54 s
82Analytical Geometry • Two Dimensions • Coordinates and Distance
Very easy

The points , , and are :

Options
Show answer & solution

Option D

collinear

Approach

Check whether each point is a multiple of , which puts it on the line through the origin and .

Step-by-step solution

  1. 1
    , , ,
  2. 2
    For each has slope from the origin, so all four lie on
  3. 3
    The points are collinear.

    Why: Points on one line cannot be the corners of a square or a parallelogram, and three of them cannot lie on a circle.

Common mistakes

Option A

Three distinct points on one line never lie on a circle.

Option B

A square needs four points that are not on one line.

Option C

A parallelogram needs four points that are not on one line.

Skills used

Ideal time: about 50 s
83Analytical Geometry • Two Dimensions • Straight Lines
Moderate

Given that . Which one of the following is a point on a pair of straight lines ?

Options
Show answer & solution

Option B

Approach

Write the condition as a square, which shows which value of equals .

Step-by-step solution

  1. 1
    , so the condition is

    Why: , and .

  2. 2
    Divide by :
  3. 3
    A point is on when

    Why: The product is , a difference of two squares.

  4. 4
    With , , whose square is

Common mistakes

Option A

Takes the middle term as , getting and the point .

Option C

Reads as , forgetting to divide by .

Option D

Makes both slips: the sign of and the factor .

Skills used

Ideal time: about 2.5 min
84Analytical Geometry • Two Dimensions • Circle
Easy

If is the equation of a chord of the circle , then what are the coordinates of the mid-point of the chord ?

Options
Show answer & solution

Option B

Approach

The mid-point of a chord is the foot of the perpendicular from the centre to the chord.

Step-by-step solution

  1. 1
    The centre is ; the perpendicular from it to has direction , so its points are

    Why: The perpendicular from the centre bisects the chord.

  2. 2
    , so and

    Why: The mid-point lies on the chord.

  3. 3
    Mid-point

Common mistakes

Option A

Divides by instead of , getting .

Option C

Takes and also the direction .

Option D

Keeps but takes the perpendicular direction as ; the point is not on the chord, since .

Skills used

Ideal time: about 1.5 min
85Analytical Geometry • Two Dimensions • Identifying Conic Sections
Very easy

Consider the following in respect of the equation .

1
The equation represents an ellipse if .
2
The equation represents a hyperbola if .
3
The equation represents a circle if .

How many of the statements given above are correct ?

Options
Show answer & solution

Option C

All three

Approach

Put each value of into the two denominators and read the curve off their signs and sizes.

Step-by-step solution

  1. 1
    Statement 1, : denominators and , both positive and unequal, so an ellipse. Correct.
  2. 2
    Statement 2, : denominators and , opposite signs, so a hyperbola. Correct.
  3. 3
    Statement 3, : denominators and , so , a circle. Correct.
  4. 4
    All three statements are correct.

Common mistakes

Option A

No natural slip lands on this value; it is a filler option.

Option B

Rejects one statement, most often statement 2 by misreading at as positive.

Option D

No natural slip lands on this value; it is a filler option.

Skills used

Ideal time: about 1.5 min
86Analytical Geometry • Two Dimensions • Hyperbola
Hard

Consider the following statements in respect of hyperbola :

1
The two foci are independent of .
2
The eccentricity is .
3
The distance between the two foci is 2 units.

How many of the statements given above are correct ?

Options
Show answer & solution

Option B

Only two

Approach

Read and , then find the foci and the eccentricity.

Step-by-step solution

  1. 1
    , so the foci are for every . Statement 1 is correct.

    Why: For a hyperbola .

  2. 2

    Why: , which is positive even when is negative.

  3. 3
    Statement 2 says . When , for example , but . So statement 2 is not true for every .

    Why: An eccentricity is never negative.

  4. 4
    Distance between foci . Statement 3 is correct.
  5. 5
    Two statements, 1 and 3, are correct.

    Why: The key is contestable: if is taken to be acute, and all three are correct.

Common mistakes

Option A

Rejects statement 1, taking the foci as , that is , which are the vertices.

Option C

Also defensible

Accepts , which is right only when . If is taken to be acute, all three are correct and this is the answer.

Option D

No natural slip lands on this value; it is a filler option.

Skills used

Ideal time: about 2 min
87Analytical Geometry • Two Dimensions • Circle
Easy

Consider the following in respect of the circle :

1
The circle touches both the axes.
2
The diameter of the circle is .
3
The centre of the circle lies on the line .

How many of the statements given above are correct ?

Options
Show answer & solution

Option B

Only two

Approach

Divide by , find the centre and radius, then test each statement.

Step-by-step solution

  1. 1
    : centre , radius

    Why: Here and .

  2. 2
    Statement 1: the centre is from each axis, equal to the radius, so the circle touches both axes. Correct.
  3. 3
    Statement 2: the diameter is , not . Not correct.
  4. 4
    Statement 3: , so the centre is on . Correct.
  5. 5
    Two statements, 1 and 3, are correct.

Common mistakes

Option A

No natural slip lands on this value; it is a filler option.

Option C

Accepts statement 2 by taking under the root as , so the radius is and the diameter .

Option D

No natural slip lands on this value; it is a filler option.

Skills used

Ideal time: about 2 min
88Analytical Geometry • Two Dimensions • Straight Lines
Easy

For what values of is the line parallel to the line ?

Options
Show answer & solution

Option B

Approach

Set the slope of the given line equal to , the slope of .

Step-by-step solution

  1. 1
    Slope of is

    Why: The slope of is , with .

  2. 2

    Why: Parallel lines have equal slopes.

  3. 3
    , so and
  4. 4
    or

Common mistakes

Option A

No natural slip lands on this value; it is a filler option.

Option C

Gets by a sign slip, whose roots are and .

Option D

No natural slip lands on this value; it is a filler option.

Skills used

Ideal time: about 1.5 min
89Analytical Geometry • Two Dimensions • Coordinates and Distance
Easy

The line cuts the line joining and at . What is equal to ?

Options
Show answer & solution

Option B

1 : 2

Approach

Let divide in the ratio , write by the section formula, and put it into .

Step-by-step solution

  1. 1
  2. 2
    , so

    Why: lies on .

  3. 3
    , so

Common mistakes

Option A

No natural slip lands on this value; it is a filler option.

Option C

Swaps the parts and gives .

Option D

No natural slip lands on this value; it is a filler option.

Skills used

Ideal time: about 1 min
90Analytical Geometry • Two Dimensions • Straight Lines
Easy

What is the sum of the intercepts of the line whose perpendicular distance from origin is 4 units and the angle which the normal makes with positive direction of x-axis is ?

Options
Show answer & solution

Option C

Approach

Write the line in normal form, find its intercepts, and add them.

Step-by-step solution

  1. 1
    The line is
  2. 2
    Intercepts: on the -axis and on the -axis

    Why: Put , then .

  3. 3
    Sum
  4. 4
  5. 5
  6. 6
    Sum

Common mistakes

Option A

No natural slip lands on this value; it is a filler option.

Option B

Takes as , forgetting that it is half of .

Option D

Uses and leaves out the factor .

Skills used

Ideal time: about 2 min
91Vector Algebra • Dot Product
Very easy

What is the length of projection of the vector on the vector ?

Options
Show answer & solution

Option B

Approach

The length of the projection of on is : dot product, then divide by the length of the vector projected on.

Step-by-step solution

  1. 1

    Why: Multiply matching components and add.

  2. 2

    Why: We divide by the length of the vector we project on, here .

  3. 3
    Projection

Common mistakes

Option A

No natural slip gives as the dot product; the option does not come from a standard mistake.

Option C

No natural slip gives as the dot product; the option does not come from a standard mistake.

Option D

Divides by instead of , which is the projection of on .

Skills used

Ideal time: about 51 s
92Vector Algebra • Cross Product
Very easy

If and , then what is the value of ?

Options
Show answer & solution

Option A

3

Approach

Use , which removes the unknown angle.

Step-by-step solution

  1. 1

    Why: Squared cross product plus squared dot product is , and the bracket is .

  2. 2
    , so

    Why: Put , so .

  3. 3

    Why: A length is positive.

Common mistakes

Option B

No natural slip leads to ; it only repeats .

Option C

No natural slip leads to .

Option D

Uses instead of : gives , so .

Skills used

Ideal time: about 51 s
93Vector Algebra • Dot Product
Very easy

If is the angle between vectors and such that , then which one of the following is correct ?

Options
Show answer & solution

Option C

Approach

The sign of is the sign of , since the lengths are positive.

Step-by-step solution

  1. 1
    gives

    Why: The lengths are positive, so they do not change the sign.

  2. 2
    The angle between two vectors lies in ; there exactly for

    Why: Cosine is positive up to , zero at , and negative after it.

Common mistakes

Option A

Also defensible

Gives the range of every angle between two vectors and never uses . Read literally, it is still a true statement about , so on the reading that any true statement will do it is also correct; is the range the given condition decides.

Option B

Takes as the obtuse range; that range has .

Option D

Drops the end values: gives and gives , and both satisfy .

Skills used

Ideal time: about 54 s
94Vector Algebra • Vector Basics
Easy

The vectors , and are collinear if :

Options
Show answer & solution

Option C

Approach

Read the three vectors as position vectors of points ; they are collinear when and are parallel, that is have proportional components.

Step-by-step solution

  1. 1

    Why: End minus start.

  2. 2
  3. 3

    Why: Parallel vectors have proportional components.

  4. 4
    , so

Common mistakes

Option A

No natural slip leads to .

Option B

Drops the minus sign at the end: instead of .

Option D

No natural slip leads to ; it only halves the in the question.

Skills used

Ideal time: about 1.5 min
95Vector Algebra • Cross Product
Easy

Consider the following in respect of the vectors and :

1
The number of unit vectors perpendicular to both and is only one.
2
The angle between the vectors is .

Which of the statements given above is/are correct ?

Options
Show answer & solution

Option B

2 only

Approach

Find for statement 1 and for statement 2, and judge each separately.

Step-by-step solution

  1. 1

    Why: A vector perpendicular to both comes from the cross product.

  2. 2
    Unit vectors perpendicular to both: , two of them. Statement 1 is false.

    Why: Any vector perpendicular to both is a multiple of the cross product, and a unit one can point either way.

  3. 3
    , so . Statement 2 is true.

Common mistakes

Option A

Believes statement 1 by forgetting the opposite unit vector , and also rejects statement 2, for example by taking so that .

Option C

Believes statement 1 by forgetting the opposite unit vector , and correctly accepts statement 2.

Option D

Rejects statement 2, for example by taking and getting .

Skills used

Ideal time: about 1.5 min
96Analytical Geometry • Three Dimensions • Straight Line in Space
Easy

If is the line with direction ratios and passing through , then what are the coordinates of the points on whose distance from is 2 units ?

Options
Show answer & solution

Option D

and

Approach

Turn the direction ratios into direction cosines, then step units each way from .

Step-by-step solution

  1. 1
    , so

    Why: A step of exact length needs the unit direction.

  2. 2

    Why: Multiply the unit direction by the distance .

  3. 3
  4. 4

    Why: The other point is the same step in the opposite sense.

Common mistakes

Option A

No natural slip lands on this pair: neither point is plus or minus .

Option B

Swaps the and coordinates of the first point, and flips the signs of and in the second; no single slip gives both.

Option C

Drops the minus sign of in the first point, and flips the signs of and in the second; no single slip gives both.

Skills used

Ideal time: about 1.5 min
97Analytical Geometry • Three Dimensions • Plane
Easy

Which one of the planes is parallel to the line ?

Options
Show answer & solution

Option D

Approach

A line is parallel to a plane when its direction is perpendicular to the plane's normal: test the dot product of with each normal.

Step-by-step solution

  1. 1
    Direction of the line:

    Why: Read from the denominators.

  2. 2
    Normal of is :

    Why: A zero dot product means the line runs along the plane.

  3. 3
    Point of the line: , so the line is not inside the plane

    Why: This confirms parallel, not lying in the plane.

Common mistakes

Option A

, so the line meets this plane; no natural slip makes it zero.

Option B

, so the line meets this plane; no natural slip makes it zero.

Option C

, so the line meets this plane; no natural slip makes it zero.

Skills used

Ideal time: about 1 min
98Analytical Geometry • Three Dimensions • Straight Line in Space
Easy

What is the angle between the lines and ?

Options
Show answer & solution

Option D

Approach

Find direction ratios of each line by setting the equal parts to , then test the dot product.

Step-by-step solution

  1. 1
    : , direction

    Why: The coefficients of give the direction; multiply by to clear fractions.

  2. 2
    : direction

    Why: Multiply by to clear fractions.

  3. 3

    Why: A zero dot product of direction ratios means the lines are perpendicular.

  4. 4
    Angle

Common mistakes

Option A

Takes the lines as parallel; their direction ratios and are not proportional.

Option B

No natural slip leads to .

Option C

Uses the coefficients and as direction ratios: , close to .

Skills used

Ideal time: about 1.5 min
99Analytical Geometry • Three Dimensions • Sphere
Very easy

What is the equation of the sphere concentric with the sphere and which passes through the origin ?

Options
Show answer & solution

Option D

Approach

Concentric spheres share the centre, so only the constant term changes; the origin fixes it.

Step-by-step solution

  1. 1
    Centre of the given sphere:

    Why: Half the coefficients of , with the sign changed.

  2. 2
    Same centre:

    Why: Keeping the terms keeps the centre.

  3. 3
    Origin on it: , so

Common mistakes

Option A

Drops the term; the centre moves to .

Option B

Drops the term; the centre moves to .

Option C

Drops the term; the centre moves to .

Skills used

Ideal time: about 48 s
100Analytical Geometry • Three Dimensions • Coordinates and Distance
Very easy

A point lies on the line joining and . If z-coordinate of is 7, what is the sum of other two coordinates ?

Options
Show answer & solution

Option A

Approach

Write a general point on line as , fix from , then add and .

Step-by-step solution

  1. 1
    , so

    Why: Every point of the line is plus a multiple of .

  2. 2
    , so

    Why: Equate the known coordinate.

  3. 3
  4. 4

Common mistakes

Option B

Leaves at 's value and moves only : .

Option C

Gets the sign of the -step wrong: , so .

Option D

No natural slip leads to .

Skills used

Ideal time: about 1 min