Skip to content

Mathematics 2022 (I)

Set A

Questions 81–100 of 120

81Analytical Geometry • Two Dimensions • Straight Lines
Easy

If the points with coordinates , and are collinear, then what is the value of where ?

Options
Show answer & solution

Option C

Approach

Collinear means the slope from to the second point equals the slope between the second and third points.

Step-by-step solution

  1. 1
    Slope of the line through and :

    Why: Cancel , allowed because .

  2. 2
    Slope from to :
  3. 3

    Why: The points lie on one line exactly when these slopes are equal.

Common mistakes

Option A

No natural slip gives .

Option B

Uses the point instead of : the slope from is , which gives .

Option D

No natural slip gives .

Skills used

Ideal time: about 2 min
82Analytical Geometry • Two Dimensions • Straight Lines
Very easy

What is the equation of the straight line which passes through the point and cuts off equal intercepts from the axes ?

Options
Show answer & solution

Option C

Approach

A line with equal intercepts is , i.e. ; the given point fixes .

Step-by-step solution

  1. 1
    Equal intercepts :

    Why: Intercept form of a line.

  2. 2
    Through :
  3. 3
    , i.e.

Common mistakes

Option A

Gets the sign of wrong, ; this line does not pass through : .

Option B

No natural slip gives it: its intercepts are and , not equal, and , so it misses .

Option D

No natural slip gives it: its intercepts are and , and .

Skills used

Ideal time: about 49 s
83Analytical Geometry • Two Dimensions • Circle
Easy

What is the equation of the circle which touches both the axes in the first quadrant and the line ?

Options
Show answer & solution

Option C

Approach

Touching both axes in the first quadrant puts the centre at ; touching then fixes .

Step-by-step solution

  1. 1
    Centre , radius , with

    Why: Its distance from each axis must equal the radius.

  2. 2
    Distance of from :

    Why: A line touches a circle when its distance from the centre equals the radius.

  3. 3
    is impossible, so and .

    Why: Keep the modulus and try both cases.

  4. 4

Common mistakes

Option A

Gets the constant wrong: , not . This is a circle of centre and radius , which cuts the axes.

Option B

Flips the signs of the centre to : that circle touches the axes in the third quadrant.

Option D

Takes the radius as , the height of the line: centre , but then passes through the centre and cuts the circle.

Skills used

Ideal time: about 1.5 min
84Analytical Geometry • Two Dimensions • Parabola
Very easy

What is the equation of the parabola with focus and directrix ?

Options
Show answer & solution

Option D

Approach

The focus is on the -axis at and the directrix is : the vertex is midway, at the origin, and the parabola opens to the left.

Step-by-step solution

  1. 1
    Vertex midway between and : the origin. The focus is to the left, so the form is with .

    Why: For the focus is and the directrix .

  2. 2

Common mistakes

Option A

Takes instead of , and loses the sign too.

Option B

Puts the axis along the -axis, though the focus is on the -axis.

Option C

Loses the sign: has focus and opens to the right.

Skills used

Ideal time: about 46 s
85Analytical Geometry • Two Dimensions • Ellipse
Very easy

What is the distance between the foci of the ellipse ?

Options
Show answer & solution

Option B

Approach

Write the ellipse in standard form, find from , and give .

Step-by-step solution

  1. 1
    : ,
  2. 2
    , so

    Why: The foci are at with .

  3. 3
    Distance between the foci

Common mistakes

Option A

Uses as if it were : .

Option C

Gives the length of the major axis, , instead of the distance between the foci.

Option D

No natural slip gives .

Skills used

Ideal time: about 56 s
86Trigonometry • Properties of Triangles
Moderate

Let , , be the lengths of sides , , respectively of a triangle . If is the perimeter and is the area of the triangle, then what is equal to ?

Options
Show answer & solution

Option D

Approach

Write and , use , and turn into the area with .

Step-by-step solution

  1. 1
    With the semi-perimeter, and .
  2. 2
    , with the inradius

    Why: The tangent from to the incircle has length , and the radius to the point of contact is perpendicular to it.

  3. 3
  4. 4
    , so the expression is .

    Why: The area of a triangle is its inradius times its semi-perimeter.

Common mistakes

Option A

Takes as the semi-perimeter: .

Option B

Keeps but writes as , losing one factor : .

Option C

No natural slip gives .

Skills used

Ideal time: about 2 min
87Analytical Geometry • Two Dimensions • Straight Lines
Easy

A straight line passes through the point of intersection of and . It cuts equal intercepts in the fourth quadrant. What is the sum of the absolute values of the intercepts ?

Options
Show answer & solution

Option A

Approach

Find the point of intersection, then the line through it whose intercepts are equal in size, one on each side as the fourth quadrant needs.

Step-by-step solution

  1. 1
    From , ; then , . The point is .
  2. 2
    The line cuts off the intercepts on the -axis and on the -axis (): , i.e. .

    Why: A segment in the fourth quadrant joins a point on the positive -axis to one on the negative -axis.

  3. 3
    Through : . The intercepts are and .
  4. 4
    Sum of their absolute values:

Common mistakes

Option B

No natural slip gives .

Option C

No natural slip gives .

Option D

No natural slip gives .

Skills used

Ideal time: about 1.5 min
88Analytical Geometry • Two Dimensions • Straight Lines
Very easy

Under which one of the following conditions are the lines and parallel ?

Options
Show answer & solution

Option C

Approach

Compare the slopes and ; then note what each case of equal slopes gives.

Step-by-step solution

  1. 1
    Slopes: and

    Why: The slope of is .

  2. 2
    Parallel

    Why: Two non-vertical lines are parallel exactly when their slopes are equal.

  3. 3
    Of the two cases, makes the equations identical ( twice), the same line; gives and , two distinct parallel lines when .

    Why: Equal slopes allow the two lines to be one and the same; that needs the constants in the same ratio too.

  4. 4
    So the condition for parallel lines, equal slopes, is . The key is contestable: if parallel lines must be two distinct lines, only (with ) qualifies, which is option B.

    Why: The key follows the textbook test, equal slopes, which the printed words ask for without excluding coincident lines.

Common mistakes

Option A

Keeps only the case and misses ; and is the case in which the two lines coincide.

Option B

Also defensible

Defensible if parallel lines must be two distinct lines: makes them the same line, and gives distinct parallel lines when . The key is preferred because equal slopes is the textbook condition for parallel lines, and with the case also gives one line, so even on this reading B is not exact.

Option D

No natural slip gives it; the product of the two slopes is always , so the lines are never perpendicular and plays no part.

Skills used

Ideal time: about 53 s
89Analytical Geometry • Two Dimensions • Locus
Very easy

What is the equation of the locus of the mid-point of the line segment obtained by cutting the line , (where is a real number) by the coordinate axes ?

Options
Show answer & solution

Option A

Approach

Find the mid-point of the intercepted segment in terms of , then eliminate .

Step-by-step solution

  1. 1
    meets the axes at and .
  2. 2
    Mid-point
  3. 3
    for every , so the locus is , i.e. .

    Why: A locus is the relation between and once the varying is removed.

Common mistakes

Option B

Gets a sign wrong: the mid-point has equal coordinates, not opposite ones.

Option C

No natural slip gives ; the locus cannot contain , which varies.

Option D

Gives the line being cut, not the path of the mid-point; and it still contains the varying .

Skills used

Ideal time: about 1 min
90Analytical Geometry • Two Dimensions • Locus
Easy

If the point is equidistant from the points and where , then which one of the following is correct ?

Options
Show answer & solution

Option C

Approach

Equate the squared distances to the two points and simplify.

Step-by-step solution

  1. 1

    Why: Equal distances have equal squares, which avoids square roots.

  2. 2

    Why: The and cancel.

  3. 3
    ; divide by ():

Common mistakes

Option A

Drops the constant terms and : is parallel to the answer but passes through the origin.

Option B

Swaps the coefficients of and .

Option D

Gets the sign of the constant wrong when moving across.

Skills used

Ideal time: about 1.5 min
91Analytical Geometry • Three Dimensions • Sphere
Very easy

Consider the following for the next three (03) items that follow :

The plane where meets the coordinate axes at , and respectively. The equation of the sphere passing through the origin and , , is .

What is the value of ?

Options
Show answer & solution

Option B

Approach

Find from the sphere, then put into the plane.

Step-by-step solution

  1. 1
    On the -axis put in the sphere: , so or . Hence .

    Why: is on the -axis and on the sphere. The sphere meets the -axis at the origin and at one more point, and that point is .

  2. 2
    lies on the plane: , so .

    Why: is also where the plane meets the -axis, so it satisfies the plane's equation.

Common mistakes

Option A

Takes equal to the -intercept , instead of solving .

Option C

No natural slip gives ; it is the coefficient of in the plane.

Option D

No natural slip gives ; it is the constant term of the plane.

Skills used

Ideal time: about 1 min
92Analytical Geometry • Three Dimensions • Sphere
Easy

Same directions as Q91

If is the perpendicular distance from the centre of the sphere to the plane, then which one of the following is correct ?

Options
Show answer & solution

Option B

Approach

Find and the centre of the sphere, then use the distance of a point from a plane.

Step-by-step solution

  1. 1
    On the -axis put in the sphere: , so or . Hence .

    Why: is on the -axis and on the sphere. The sphere meets the -axis at the origin and at one more point, and that point is .

  2. 2
    lies on the plane: , so .

    Why: is also where the plane meets the -axis, so it satisfies the plane's equation.

  3. 3
    The plane is .
  4. 4
    Centre of : .

    Why: The centre is minus half of each coefficient of , , .

  5. 5

    Why: Put the centre into the left side of the plane and divide by the length of the normal.

  6. 6
    , so , that is .

    Why: Squares place without a calculator.

Common mistakes

Option A

Divides by instead of : .

Option C

No natural slip gives a value between and .

Option D

Finds the distance of the origin from the plane, , instead of the distance of the centre.

Skills used

Ideal time: about 1.5 min
93Analytical Geometry • Three Dimensions • Straight Line in Space
Very easy

Same directions as Q91

What is the equation of the line through the origin and the centre of the sphere ?

Options
Show answer & solution

Option D

Approach

Find the centre, then write the line through the origin in that direction.

Step-by-step solution

  1. 1
    Centre of : .

    Why: The centre is minus half of each coefficient of , , .

  2. 2
    Line through with direction :

    Why: The line joins the origin to the centre, so the centre's coordinates are its direction ratios.

  3. 3
    That is . Multiply each part by : .

    Why: Multiply all three parts by the same number to clear the fractions.

Common mistakes

Option A

No natural slip gives ; that line has direction .

Option B

Uses , the coefficients in the sphere, as multipliers: . The line with direction is .

Option C

Swaps the multipliers of and when clearing the fractions.

Skills used

Ideal time: about 54 s
94Analytical Geometry • Three Dimensions • Plane
Very easy

Consider the following for the next two (02) items that follow :

Let the plane pass through the point .

What are the direction ratios of a normal to the plane ?

Options
Show answer & solution

Option A

Approach

Find from the point, clear fractions, and read the coefficients.

Step-by-step solution

  1. 1
    , so and .

    Why: The point lies on the plane, so it satisfies the equation.

  2. 2
    The plane is . Multiply by : .

    Why: Clear the fractions before reading anything off.

  3. 3
    Normal direction ratios: .

    Why: The coefficients of , , give a normal to the plane.

Common mistakes

Option B

Takes the intercepts as the normal. The normal goes as the reciprocals of the intercepts.

Option C

Writes the intercepts in reverse order as the normal; no correct working gives .

Option D

Reads the coefficients of in reverse order.

Skills used

Ideal time: about 1 min
95Analytical Geometry • Three Dimensions • Plane
Very easy

Same directions as Q94

If , and are the intercepts made by the plane on the coordinate axes respectively, then what is equal to ?

Options
Show answer & solution

Option B

Approach

Find , write the plane in intercept form, and add the intercepts.

Step-by-step solution

  1. 1
    , so and .

    Why: The point lies on the plane, so it satisfies the equation.

  2. 2
    The plane is . Multiply by : .

    Why: Clear the fractions before reading anything off.

  3. 3
    Divide by : , so , , .

    Why: In intercept form the denominators are the intercepts.

  4. 4

Common mistakes

Option A

Puts into as , which gives and intercepts , adding to .

Option C

No natural slip gives .

Option D

No natural slip gives .

Skills used

Ideal time: about 55 s
96Vector Algebra • Vector Basics
Very easy

If and are collinear vectors, then what are the possible values of and respectively ?

Options
Show answer & solution

Option C

Approach

Collinear vectors are multiples of each other; find the multiple from the parts.

Step-by-step solution

  1. 1

    Why: Collinear vectors lie along one line, so one is a scalar multiple of the other.

  2. 2
    : , so .

    Why: The parts are both known, so they give .

  3. 3
    ,

Common mistakes

Option A

Copies the first vector's components. Then the parts, and , would also have to be equal, and they are not.

Option B

No natural slip gives ; it is the first vector's and parts swapped.

Option D

Finds the right values but gives them in the wrong order, before .

Skills used

Ideal time: about 1 min
97Vector Algebra • Vector Basics
Very easy

If , , are the position vectors of the vertices , , respectively of a triangle and is the centroid of the triangle, then what is equal to ?

Options
Show answer & solution

Option C

Approach

Write the position vector of , then subtract the position vector of .

Step-by-step solution

  1. 1

    Why: The centroid's position vector is the average of the vertices' position vectors.

  2. 2

    Why: A vector from to is the end's position vector minus the start's.

Common mistakes

Option A

Gives the position vector of itself, , and forgets to subtract .

Option B

Subtracts the other way, , which is .

Option D

No natural slip gives .

Skills used

Ideal time: about 1 min
98Vector Algebra • Cross Product
Easy

Consider the following statements :

1
Dot product over vector addition is distributive
2
Cross product over vector addition is distributive
3
Cross product of vectors is associative

Which of the above statements is/are correct ? :

Options
Show answer & solution

Option C

1 and 2 only

Approach

Judge each law on its own: recall the two that hold, and test the third with and .

Step-by-step solution

  1. 1
    Statement 1: . Correct.

    Why: The dot product distributes over addition; this is what lets us multiply out dot products like brackets.

  2. 2
    Statement 2: . Correct.

    Why: The cross product also distributes over addition.

  3. 3
    Statement 3: , but . Not correct.

    Why: One example where the two bracketings differ shows the law fails.

  4. 4
    Statements 1 and 2 only are correct.

Common mistakes

Option A

Thinks the cross product does not distribute over addition, and drops statement 2.

Option B

Drops statement 1, missing that the dot product distributes over addition.

Option D

Treats the cross product like ordinary multiplication and accepts statement 3.

Skills used

Ideal time: about 1.5 min
99Vector Algebra • Cross Product
Moderate

Let , , be three non-zero vectors such that . Consider the following statements :

1
is unique if and are given
2
is unique if and are given

Which of the above statements is/are correct ?

Options
Show answer & solution

Option B

2 only

Approach

Test statement 1 by changing in a way that keeps the same.

Step-by-step solution

  1. 1
    Statement 1: . Not correct.

    Why: Adding a multiple of to does not change the cross product, so and allow many .

  2. 2
    Statement 2: is one definite vector. Correct.

    Why: Once and are known, their cross product has one magnitude and one direction.

  3. 3
    Statement 2 only is correct.

Common mistakes

Option A

Reverses the verdicts: thinks can be recovered, and cannot.

Option C

Treats like a number equation and 'divides' by ; a vector cannot be divided out of a cross product.

Option D

Rejects statement 2 as well, though a cross product of two given vectors is always one definite vector.

Skills used

Ideal time: about 1 min
100Vector Algebra • Dot Product
Hard

Let and be two unit vectors such that . If is the angle between and , then which one of the following is correct ?

Options
Show answer & solution

Option D

Approach

Write in terms of , turn the given inequality into one on , then test each option against every allowed pair of vectors. This key is contestable: if the two vectors must be different, A is the exact range.

Step-by-step solution

  1. 1

    Why: Square the length and expand; then .

  2. 2
    The angle lies in , so and . Hence .

    Why: The angle between two vectors is never more than ; this fixes the sign of .

  3. 3
    , so . With step 2: .

    Why: The condition only rules out , where the vectors point in opposite directions.

  4. 4
    is allowed: when , the angle is and .

    Why: Check the ends of the range: the question does not say the vectors are different.

  5. 5
    Every allowed value satisfies , so option D is correct. Option A fails when .

    Why: Option D is true for every pair the question allows. Option A excludes , which can happen.

Common mistakes

Option A

Also defensible

Finds and but drops the case , where . If the two vectors are taken to be different, is the exact range, and on that reading A is right and the sharper answer.

Option B

No natural slip gives this range. It fails at : the angle is , , but .

Option C

Takes negative, forgetting that (angle between the vectors) lies in .

Skills used

Ideal time: about 2.5 min