Skip to content

Mathematics 2021 (II)

Set A

Questions 61–80 of 120

61Analytical Geometry • Three Dimensions • Plane
Very easy

The locus of a point which moves in such a way that is a

Options
Show answer & solution

Option D

plane parallel to -plane

Approach

Count how many coordinates the condition fixes: one condition in space leaves a surface, not a line.

Step-by-step solution

  1. 1
    fixes only . The coordinates and can take any values.

    Why: One equation in space removes one freedom. Two freedoms are left, so the point sweeps out a flat sheet, not a line.

  2. 2
    Every point of the locus is units above the -plane, so the locus is the plane , parallel to the -plane.

Common mistakes

Option A

Takes the locus to be a line. A line parallel to the -axis needs two conditions, such as and ; here is free too.

Option B

Takes the locus to be a line. A line parallel to the -axis needs two conditions, such as and ; here is free too.

Option C

Links with the -axis. But is the one coordinate that never changes, so the point never moves in the direction.

Skills used

Ideal time: about 42 s
62Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Easy

Consider the following statements :

1
A line in space can have infinitely many direction ratios.
2
It is possible for certain line that the sum of the squares of direction cosines can be equal to sum of its direction cosines.

Which of the above statements is/are correct?

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Judge each statement on its own: direction ratios are any multiples of the direction cosines, and the direction cosines always satisfy .

Step-by-step solution

  1. 1
    Statement 1: if are direction ratios of a line, so are for every . So a line has infinitely many sets of direction ratios. True.

    Why: Direction ratios only say which way the line points; their size means nothing.

  2. 2
    Statement 2: always , so we need a line with . The -axis has , and . True.

    Why: The statement only says it is possible for some line, so one example is enough.

Common mistakes

Option A

Rejects statement 2, perhaps because is usually not . The statement claims only that some line works, and the -axis does.

Option B

Thinks a line has one fixed set of direction ratios, as it has (up to sign) one set of direction cosines. Any non-zero multiple of direction ratios is again a set of direction ratios.

Option D

Makes both mistakes: treats direction ratios as fixed, and looks for a general rule instead of one example for statement 2.

Skills used

Ideal time: about 1.5 min
63Analytical Geometry • Three Dimensions • Coordinates and Distance
Easy

The -plane divides the line segment joining the points and

Options
Show answer & solution

Option C

externally in the ratio

Approach

Let the -plane divide the join in the ratio , write the -coordinate of the dividing point by the section formula, and set it to .

Step-by-step solution

  1. 1
    The dividing point has -coordinate .

    Why: The -plane is , so only the -coordinates, and , matter.

  2. 2

    Why: A point on the -plane has .

  3. 3
    is negative, so the division is external, in the ratio .

    Why: A negative ratio means the point lies outside the segment. This fits: both -values, and , are positive, so both points are on the same side of the -plane.

Common mistakes

Option A

Drops the minus sign of and reads as internal division.

Option B

Drops the minus sign and also writes the ratio the other way round, .

Option D

No natural slip in the working gives this option. With the ratio externally, the -coordinate is , not .

Skills used

Ideal time: about 1.5 min
64Analytical Geometry • Three Dimensions • Sphere
Easy

The number of spheres of radius touching the coordinate axes is

Options
Show answer & solution

Option C

Approach

Let the centre be . Touching an axis means the centre's distance from that axis equals ; solve the three conditions and count the centres.

Step-by-step solution

  1. 1
    Touching the -, - and -axes: , , .

    Why: A sphere touches a line when the distance of its centre from the line equals the radius. The distance of from the -axis is , and so on.

  2. 2
    Subtracting the equations in pairs gives . Then , so .

    Why: Each pair of equations differs in just one square.

  3. 3
    Each of is or , chosen independently: centres, so spheres.

    Why: Each sign pattern gives a different centre, one in each octant, and every one satisfies all three equations. No other centre does.

Common mistakes

Option A

Thinks of a circle touching the two axes of a plane, which has one centre in each of the quadrants. In space there are octants.

Option B

No natural slip in the working gives this option. is the number of half-axes, but the centres come from choosing three signs, not one direction.

Option D

Thinks the radius alone does not fix the centre. The three touching conditions fix , and , leaving only the signs free.

Skills used

Ideal time: about 1.5 min
65Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Moderate

is a cuboid with base . Let , , and be the vertices. If is the angle between and ; is the angle between and , then what is the value of ?

Options
Show answer & solution

Option B

Approach

Find and from dot products of the edge vectors at , then use .

Step-by-step solution

  1. 1
    , , , and .

    Why: is the origin, so each vector from is just the other point's coordinates.

  2. 2
  3. 3
    and , so and .

    Why: Keep : the double-angle formula needs only the square, so there is no root to simplify.

  4. 4
    and
  5. 5

Common mistakes

Option A

No natural slip in the working gives this option.

Option C

No natural slip in the working gives this option.

Option D

No natural slip in the working gives this option.

Skills used

Ideal time: about 3 min
66Vector Algebra • Cross Product
Moderate

Let , and be unit vectors such that is perpendicular to . If is the angle between and , then which of the following is/are correct?

1
2

Select the correct answer using the code given below.

Options
Show answer & solution

Option B

2 only

Approach

Test statement 1 by taking its dot product with ; rewrite statement 2 as the scalar triple product .

Step-by-step solution

  1. 1
    Statement 1: dot both sides of with : , that is .

    Why: The left side is because is perpendicular to , and for a unit vector. So statement 1 needs , that is parallel to . It does not hold in general: false.

  2. 2
    Statement 2: . True.

    Why: In a scalar triple product the dot and the cross can change places. The last form is because is perpendicular to .

Common mistakes

Option A

Reads as the unit vector along , as in . The question makes perpendicular to , not along it. It also misses that statement 2 is the given condition rewritten.

Option C

Accepts statement 2 rightly, but reads as the unit normal in . Here is perpendicular to , so the two cannot be parallel unless .

Option D

Does not see that , so cannot use the given condition, and rejects statement 2.

Skills used

Ideal time: about 1.5 min
67Vector Algebra • Dot Product
Easy

If and , then what is the angle between and ?

Options
Show answer & solution

Option D

Approach

Solve the two vector equations like simultaneous equations to find and , then find their dot product.

Step-by-step solution

  1. 1
    Multiply the second equation by : .

    Why: This makes the terms match, so subtracting removes .

  2. 2
    Subtract the first equation: , so .
  3. 3
  4. 4
    , so the angle between them is .

    Why: Two non-zero vectors with dot product are perpendicular.

Common mistakes

Option A

No natural slip in the working gives this option. Whatever the signs, a vector along and one along are at a right angle.

Option B

No natural slip in the working gives this option. Whatever the signs, a vector along and one along are at a right angle.

Option C

No natural slip in the working gives this option. Whatever the signs, a vector along and one along are at a right angle.

Skills used

Ideal time: about 1.5 min
68Vector Algebra • Dot Product
Easy

If is perpendicular to and magnitude of is twice that of , then what is the value of equal to?

Options
Show answer & solution

Option A

Approach

Turn the perpendicular condition into a value of , then expand the asked dot product.

Step-by-step solution

  1. 1

    Why: Perpendicular vectors have dot product ; then expand, using .

  2. 2
  3. 3

    Why: Put in from step 1 and .

Common mistakes

Option B

No natural slip in the working gives this option. The answer depends on unless it is , so it cannot be a fixed number like .

Option C

Drops the minus sign in step 1, taking : then .

Option D

Makes the sign slip of option C, getting , and then writes it with the wrong vector, in place of .

Skills used

Ideal time: about 1.5 min
69Vector Algebra • Triple Products
Easy

Let , and be three vectors such that , and are coplanar. Which of the following is/are correct?

1
is coplanar with and
2
is perpendicular to

Select the correct answer using the code given below.

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Use the fact that a cross product is perpendicular to each of its two factors, and that is a normal to the plane of and .

Step-by-step solution

  1. 1
    Statement 2: is a cross product with as a factor, so it is perpendicular to . True.

    Why: A cross product is perpendicular to both of its factors.

  2. 2
    Statement 1: is a normal to the plane of and . By step 1, is perpendicular to this normal, so it lies in that plane. True.

    Why: A vector perpendicular to the normal of a plane is parallel to the plane. If , the vector is and both statements hold trivially.

Common mistakes

Option A

Doubts statement 2, perhaps thinking a vector in the plane of and cannot also be perpendicular to . In fact every vector in that plane is perpendicular to its normal.

Option B

Accepts statement 2 but misses that being perpendicular to the normal puts the vector in the plane of and .

Option D

Confuses the vector with the number , which is for coplanar vectors, and so rejects both statements.

Skills used

Ideal time: about 1.5 min
70Vector Algebra • Vector Basics
Easy

If the position vectors of and are and respectively, then what is the magnitude of ?

Options
Show answer & solution

Option C

Approach

Find as the position vector of minus that of , then its length.

Step-by-step solution

  1. 1
  2. 2

    Why: Work with the square first; the terms cancel.

  3. 3

Common mistakes

Option A

Squares as and as , dropping the middle terms: , so . In fact .

Option B

No natural slip in the working gives this option.

Option D

No natural slip in the working gives this option.

Skills used

Ideal time: about 1.5 min
71Differential Calculus • Derivatives
Easy

If

then what is at equal to?

Options
Show answer & solution

Option B

Approach

is a product, so find as a sum of each factor's derivative over the factor, at .

Step-by-step solution

  1. 1

    Why: Taking logs turns the product into a sum, so each factor contributes its own derivative over itself.

  2. 2
    At :

    Why: Every term after the first has a power of on top.

  3. 3
    , so

Shortcut

Multiply by : the factors collapse, , so for . The derivative at is the coefficient of , which is .

Common mistakes

Option A

Sees that the derivatives of , , are all at and wrongly includes with them, though its derivative is .

Option C

No natural slip in the working gives this option.

Option D

No natural slip in the working gives this option.

Skills used

Ideal time: about 1 min
72Differential Calculus • Derivatives
Easy

If , then what is at equal to?

Options
Show answer & solution

Option A

Approach

is a product of three cosines, so is the sum of each factor's derivative over the factor.

Step-by-step solution

  1. 1

    Why: Each factor contributes its derivative over itself. By the chain rule, .

  2. 2
    At : , ,
  3. 3

    Why: No factor is here: , , . So dividing by is allowed.

Common mistakes

Option B

No natural slip in the working gives this option. Only and vanish at ; .

Option C

Drops the minus sign in the derivative of , getting , which is at .

Option D

No natural slip in the working gives this option.

Skills used

Ideal time: about 1.5 min
73Differential Calculus • Derivatives
Very easy

Let be a polynomial function such that . What is equal to?

Options
Show answer & solution

Option C

Approach

Find the degree of from the degree of , write with unknown coefficients, and compare coefficients with .

Step-by-step solution

  1. 1
    If has degree , then has degree . So and .
  2. 2
    Write . Then .
  3. 3
    Coefficient of : , so . Coefficient of : , so .

    Why: for every , so matching powers have equal coefficients.

  4. 4
    Now , so and .
  5. 5
    , so .

Common mistakes

Option A

No natural slip in the working gives this option.

Option B

Takes , whose derivative is . But then , not .

Option D

Differentiates at , treating as if it were .

Skills used

Ideal time: about 52 s
74Differential Calculus • Limits
Very easy

What is

where , equal to?

Options
Show answer & solution

Option C

Approach

Divide top and bottom by , the fastest-growing term, so that only powers of are left.

Step-by-step solution

  1. 1

    Why: , so grows fastest.

  2. 2
    , so , and the limit is .

Common mistakes

Option A

Treats as the larger term. Dividing by and then wrongly letting gives . Since , it is that goes to .

Option B

No natural slip in the working gives this option.

Option D

Sees the form and stops. That form means more work is needed; it is not an answer.

Skills used

Ideal time: about 53 s
75Differential Calculus • Limits
Easy

Let

If exists, then what is the value of ?

Options
Show answer & solution

Option D

Approach

The limit at exists when the left-hand limit (from the first rule) equals the right-hand limit (from the second rule).

Step-by-step solution

  1. 1
    Left-hand limit at , from :

    Why: Just left of the first rule applies.

  2. 2
    Right-hand limit at , from :
  3. 3
  4. 4
    or . Only is among the options.

    Why: is not allowed at all, because would not be defined.

Common mistakes

Option A

No natural slip in the working gives this option. With the left-hand limit is and the right-hand limit is .

Option B

Gets the sign of the middle term wrong, solving , whose roots are and . With the limits are and .

Option C

Takes , perhaps to make the second rule . But then in the first rule is not defined.

Skills used

Ideal time: about 1.5 min
76Differential Calculus • Continuity and Differentiability
Very easy

Consider the following statements in respect of :

1
is continuous at .
2
is differentiable at .

Which of the above statements is/are correct?

Options
Show answer & solution

Option A

1 only

Approach

Judge each statement on its own: is built from continuous pieces, and has a corner at .

Step-by-step solution

  1. 1
    Statement 1: is continuous everywhere, and subtracting keeps it continuous. So is continuous at . True.
  2. 2
    Statement 2: for and for . The left derivative at is and the right derivative is . They differ, so is not differentiable at . False.

    Why: Shifting the graph of down by does not change its shape, so the corner at stays.

Common mistakes

Option B

Gets both verdicts the wrong way round: has no break at , and its corner at makes it not differentiable there.

Option C

Thinks subtracting smooths the corner of at . Shifting a graph down does not change its shape.

Option D

Thinks breaks at , perhaps because . A zero value is not a break; the graph passes through smoothly.

Skills used

Ideal time: about 1 min
77Differential Calculus • Limits
Very easy

If , , where denotes the greatest integer function, then what is the right-hand limit of at ?

Options
Show answer & solution

Option C

Approach

Just to the right of , replace and by what they equal there, then take the limit.

Step-by-step solution

  1. 1
    For : and .

    Why: when , and for positive .

  2. 2
    So just right of , , and .

Common mistakes

Option A

No natural slip in the working gives this option.

Option B

Uses , its value just to the left of . That gives the left-hand limit, , not the right-hand limit.

Option D

Thinks the jump of at stops the right-hand limit from existing. The jump only makes the left-hand and right-hand limits differ; each exists.

Skills used

Ideal time: about 53 s
78Differential Calculus • Continuity and Differentiability
Easy

Consider the following statements in respect of the function , :

1
It is continuous at , if .
2
It is continuous at .

Which of the above statements is/are correct?

Options
Show answer & solution

Option B

2 only

Approach

At , ask whether settles to a limit; away from , is built from continuous pieces.

Step-by-step solution

  1. 1
    Statement 1: as , grows without bound, and keeps taking the values and at points as close to as we like. So does not exist, and no value of makes continuous at . False.
  2. 2
    Statement 2: at , is defined and continuous, and is continuous everywhere. So is continuous there. True.

    Why: A composition of continuous functions is continuous; the only trouble point is .

Common mistakes

Option A

Accepts statement 1, confusing with , which does tend to . It also rejects statement 2, though is continuous at every .

Option C

Accepts statement 1, confusing with , which does tend to . Without a factor that goes to , the sine never settles.

Option D

Rejects statement 2, perhaps because of the unusual point. But is a composition of continuous functions at every .

Skills used

Ideal time: about 1 min
79Algebra • Functions
Very easy

What is the range of the function defined on entire real line?

Options
Show answer & solution

Option B

Approach

Start from the range of and apply the operations of to the inequality.

Step-by-step solution

  1. 1
    , and every value in between is taken.
  2. 2
    Multiply by : . Add : .

    Why: Multiplying by a negative number reverses the inequalities, but here the interval maps to itself.

  3. 3
    Both ends are reached: at and at . So the range is .

    Why: The ends are included because actually reaches and .

Common mistakes

Option A

Leaves out the end values, forgetting that actually reaches and .

Option C

Gives the range of itself, without the , and also drops its end values.

Option D

Gives the range of , forgetting the in front.

Skills used

Ideal time: about 49 s
80Differential Calculus • Derivatives
Moderate

What is the slope of the tangent of at ?

Options
Show answer & solution

Option A

Approach

Simplify near using the principal range of , then differentiate.

Step-by-step solution

  1. 1
    For , the angle in with the same cosine as is . So near .

    Why: always returns an angle in , and . Since is not in , is not here.

  2. 2
    , so the slope of the tangent at is .

Common mistakes

Option B

No natural slip in the working gives this option.

Option C

Cancels against to get . That holds only for in .

Option D

No natural slip in the working gives this option.

Skills used

Ideal time: about 52 s