Skip to content

Mathematics 2021 (I)

Set A

Questions 61–80 of 120

61Analytical Geometry • Two Dimensions • Straight Lines
Very easy

Consider the following statements in respect of the points , and :

1
The points lie on a straight line.
2
The points always lie in the first quadrant only for any value of and .

Which of the above statements is/are correct?

Options
Show answer & solution

Option A

1 only

Approach

Look for one rule linking and that every point obeys, then test statement 2 with one value of .

Step-by-step solution

  1. 1
    : . : . : .

    Why: In each point the -coordinate is less than the -coordinate, whatever and are.

  2. 2
    All three points lie on the line , so statement 1 is correct.

    Why: Points that satisfy one linear equation lie on that line.

  3. 3
    Take : the point is .

    Why: One value of that breaks statement 2 is enough to show it is not always true.

  4. 4
    is on the -axis, below the origin, not in the first quadrant. Statement 2 is wrong.

    Why: A point on an axis lies in no quadrant. Points like , from , are in the fourth quadrant.

  5. 5
    Only statement 1 is correct.

Common mistakes

Option B

Takes the letters to be positive, so all points look like they are in the first quadrant, and misses that the points are collinear.

Option C

Accepts statement 2 by trying only positive values of and ; gives , which is not in the first quadrant.

Option D

Thinks that points with unknown letters cannot be shown collinear, and so rejects statement 1; the rule holds for every and .

Skills used

Ideal time: about 1.5 min
62Analytical Geometry • Two Dimensions • Straight Lines
Very easy

What is the acute angle between the lines and ?

Options
Show answer & solution

Option B

Approach

Find the inclination of each line with the -axis and subtract.

Step-by-step solution

  1. 1
    is , a vertical line: inclination .

    Why: A line constant is parallel to the -axis. Its slope is not defined, so the formula cannot be used for it.

  2. 2
    gives : slope .

    Why: Make the subject to read the slope.

  3. 3
  4. 4
    Angle between the lines .

    Why: The angle between two lines is the difference of their inclinations; is already acute.

Common mistakes

Option A

Thinks the lines are parallel. They are not: one is vertical and the other has slope .

Option C

No natural slip gives ; it would need slope for the second line.

Option D

Gives the angle of the second line with the -axis, , and forgets that the first line is vertical, not horizontal.

Skills used

Ideal time: about 58 s
63Analytical Geometry • Two Dimensions • Straight Lines
Very easy

The point of intersection of diagonals of a square is at the origin and one of its vertices is at . What is the equation of the diagonal ?

Options
Show answer & solution

Option A

Approach

passes through the centre and is perpendicular to the other diagonal , which is the line .

Step-by-step solution

  1. 1
    Diagonal passes through and : slope .

    Why: The diagonals meet at the origin, so , , are on one line.

  2. 2
    Slope of , since .

    Why: The diagonals of a square are perpendicular, and perpendicular lines have slopes with product .

  3. 3
    : , that is .

    Why: also passes through the origin, so its equation is .

Common mistakes

Option B

Takes slope , the reciprocal of without the minus sign.

Option C

Takes slope , changing the sign but not taking the reciprocal.

Option D

This is , the diagonal itself, not .

Skills used

Ideal time: about 1 min
64Analytical Geometry • Two Dimensions • Hyperbola
Easy

If any point on a hyperbola is , then what is the eccentricity of the hyperbola?

Options
Show answer & solution

Option D

Approach

Remove with , then read the eccentricity of the hyperbola.

Step-by-step solution

  1. 1
    , .
  2. 2

    Why: removes .

  3. 3
    The term is positive, so the hyperbola opens along the -axis, with semi-transverse axis .

    Why: The axis under the positive term is the transverse axis.

  4. 4
    , so .

    Why: , and .

Common mistakes

Option A

Takes , the ratio of the two semi-axes, forgetting the under the root.

Option B

No natural slip gives ; it would need , that is .

Option C

No natural slip gives ; it would need .

Skills used

Ideal time: about 1.5 min
65Analytical Geometry • Two Dimensions • Identifying Conic Sections
Very easy

Consider the following with regard to eccentricity () of a conic section :

1
for circle
2
for parabola
3
for ellipse

Which of the above are correct?

Options
Show answer & solution

Option D

1, 2 and 3

Approach

Check each statement against the eccentricity of each conic.

Step-by-step solution

  1. 1
    Circle: . Statement 1 is correct.

    Why: A circle is the ellipse whose foci have come together at the centre, so and .

  2. 2
    Parabola: . Statement 2 is correct.

    Why: Every point of a parabola is as far from the focus as from the directrix.

  3. 3
    Ellipse: . Statement 3 is correct.

    Why: For an ellipse , so .

  4. 4
    All three are correct.

Common mistakes

Option A

Leaves out statement 3, perhaps mixing up the ellipse () with the hyperbola ().

Option B

Leaves out statement 1, thinking a circle has no eccentricity; it has .

Option C

Leaves out statement 2; a parabola has exactly .

Skills used

Ideal time: about 1 min
66Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Easy

What is the angle between the two lines having direction ratios and ?

Options
Show answer & solution

Option B

Approach

Use with the direction ratios.

Step-by-step solution

  1. 1

    Why: The top is the dot product of the direction ratios.

  2. 2
    ,
  3. 3
  4. 4

Shortcut

Divide the ratios first: and . Then .

Common mistakes

Option A

No natural slip gives ; it would need .

Option C

Takes as instead of : , giving .

Option D

Takes the lines to be perpendicular; their dot product is , not .

Skills used

Ideal time: about 1.5 min
67Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Easy

If , , are the direction cosines of the line , then what is equal to?

Options
Show answer & solution

Option B

Approach

Put the line in symmetric form to read its direction ratios, turn them into direction cosines, then add the fourth powers.

Step-by-step solution

  1. 1

    Why: Each of , , must have coefficient on top: and .

  2. 2
    Direction ratios , or .

    Why: Multiply by to clear the fraction.

  3. 3
    , so
  4. 4

Common mistakes

Option A

Confuses with , which is always .

Option C

No natural slip gives . Reading the direction ratios as gives , not this.

Option D

No natural slip gives ; direction cosines are at most in size, so the sum of fourth powers is at most .

Skills used

Ideal time: about 1.5 min
68Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Easy

What is the projection of the line segment joining and on -axis?

Options
Show answer & solution

Option C

Approach

The projection of a segment on an axis is the change in that coordinate.

Step-by-step solution

  1. 1
    Direction cosines of the -axis: .
  2. 2
    Projection

    Why: The projection on a line with direction cosines is ; on the -axis only is left.

Common mistakes

Option A

Gives , the projection on the -plane, not on the -axis.

Option B

Uses the -coordinates, : the projection on the -axis.

Option D

No natural slip gives .

Skills used

Ideal time: about 52 s
69Analytical Geometry • Three Dimensions • Straight Line in Space
Moderate

What is the number of possible values of for which the line joining the points and also passes through the point ?

Options
Show answer & solution

Option A

Zero

Approach

Write a general point of the line through the first two points and ask for which it can be .

Step-by-step solution

  1. 1
    , ,
  2. 2
    General point:

    Why: Every point on line is .

  3. 3
    : , so .

    Why: The -coordinate has no , so it fixes first.

  4. 4
    : , so , .
  5. 5
    : , so , .
  6. 6
    The and conditions need different , so no works.

    Why: All three coordinates must match at once.

Common mistakes

Option B

Uses only one of the coordinate conditions, for example from , and does not check .

Option C

Counts the two values and as two answers; each fails the other condition.

Option D

No natural slip gives infinitely many; that would need every condition to hold for all .

Skills used

Ideal time: about 2 min
70Analytical Geometry • Three Dimensions • Plane
Very easy

The foot of the perpendicular drawn from the origin to the plane is

Options
Show answer & solution

Option C

Approach

Go from the origin along the normal until you reach the plane.

Step-by-step solution

  1. 1
    Normal of : .
  2. 2
    Point on the perpendicular: .

    Why: The perpendicular from the origin runs along the normal.

  3. 3
    , so : foot .

    Why: The foot is the point of this line that lies on the plane.

Common mistakes

Option A

lies on the plane () but not on the normal through the origin.

Option B

is where the plane meets the -axis; it is on the plane but not on the normal.

Option D

lies on the plane but not on the normal through the origin.

Skills used

Ideal time: about 51 s
71Vector Algebra • Vector Basics
Very easy

A vector is equally inclined to both and axes. If the magnitude of the vector is 2 units, then what are the values of and respectively?

Options
Show answer & solution

Option C

Approach

Equal angles with the axes give equal components; the magnitude then fixes them.

Step-by-step solution

  1. 1
    ,

    Why: Each component is the dot product with that axis's unit vector.

  2. 2
    , so .

    Why: The vector is equally inclined to both axes.

  3. 3
    , so , .

    Why: Of , only the positive value is among the options.

  4. 4

Common mistakes

Option A

No natural slip gives ; with it , not .

Option B

Gives the components of the unit vector, each, and forgets to multiply by the magnitude .

Option D

Takes each component equal to the magnitude ; then .

Skills used

Ideal time: about 1 min
72Vector Algebra • Dot Product
Very easy

Consider the following statements in respect of a vector , where :

1
is perpendicular to .
2
is perpendicular to .

Which of the above statements is/are correct?

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Test each statement by a dot product.

Step-by-step solution

  1. 1

    Why: Expand like ; the cross terms and cancel.

  2. 2
    So : statement 1 is correct.

    Why: A zero dot product means perpendicular.

  3. 3
    is perpendicular to and to , so .

    Why: The cross product is perpendicular to each of its factors.

  4. 4
    Statement 2 is correct. Both are correct.

Common mistakes

Option A

Rejects statement 2, forgetting that is perpendicular to both and , so to their sum.

Option B

Rejects statement 1 by not expanding ; it is .

Option D

Rejects both; each dot product is .

Skills used

Ideal time: about 1 min
73Vector Algebra • Dot Product
Easy

If and are two vectors such that , then which one of the following is correct?

Options
Show answer & solution

Option C

must be perpendicular to .

Approach

Square both lengths and compare.

Step-by-step solution

  1. 1
    ,

    Why: The square of a length is the vector dotted with itself.

  2. 2
    Equal lengths: , so .
  3. 3

Common mistakes

Option A

Unit vectors would give , but here it is ; nothing forces unit length.

Option B

Parallel non-zero vectors have , so the two lengths would differ.

Option D

If , then , not .

Skills used

Ideal time: about 1.5 min
74Vector Algebra • Triple Products
Very easy

If , and are coplanar, then what is equal to?

Options
Show answer & solution

Option C

Approach

Take the numbers out, so each term is a multiple of the scalar triple product, which is for coplanar vectors.

Step-by-step solution

  1. 1

    Why: Scalars come out of a cross product and a dot product.

  2. 2

    Why: A cyclic shift does not change the scalar triple product.

  3. 3
    , so the sum is .

    Why: is perpendicular to the plane of , , , so its dot product with is .

Common mistakes

Option A

Adds the numbers , treating the triple product as and ignoring that the vectors are coplanar.

Option B

Takes the triple product as and gives the first term the wrong sign, as if had been swapped: .

Option D

Takes the triple product as and thinks the cyclic shift changes its sign, : .

Skills used

Ideal time: about 54 s
75Vector Algebra • Dot Product
Easy

Consider the following statements :

1
The cross product of two unit vectors is always a unit vector.
2
The dot product of two unit vectors is always unity.
3
The magnitude of sum of two unit vectors is always greater than the magnitude of their difference.

Which of the above statements are not correct?

Options
Show answer & solution

Option D

1, 2 and 3

Approach

Write each quantity for unit vectors at angle , and find a where the statement fails.

Step-by-step solution

  1. 1
    ; it is only when . Statement 1 is not correct.

    Why: For example, gives the zero vector.

  2. 2
    ; it is only when . Statement 2 is not correct.

    Why: For example, .

  3. 3
    and .

    Why: Square each length by dotting the vector with itself.

  4. 4
    For , , so the sum is shorter. Statement 3 is not correct.

    Why: For example, gives .

  5. 5
    All three statements are not correct.

    Why: The question asks for the statements that are not correct.

Common mistakes

Option A

Accepts statement 3 by picturing only an acute angle between the vectors; an obtuse angle makes the difference longer.

Option B

Accepts statement 1, forgetting that , which is only at .

Option C

Accepts statement 2, forgetting that , which is only at .

Skills used

Ideal time: about 2 min
76Differential Calculus • Limits
Moderate

If then what is the value of ?

Options
Show answer & solution

Option C

Approach

The limit has the form , so use L'Hôpital's rule and set the result equal to .

Step-by-step solution

  1. 1
    At : top , bottom .

    Why: Check the form before using L'Hôpital's rule: it is .

  2. 2

    Why: Differentiate top and bottom separately: and .

  3. 3
    At :

    Why: .

  4. 4
    , so , .

Shortcut

Test the options: with the fraction is for every , so the limit is . and do not give a defined expression, and gives .

Common mistakes

Option A

makes , which is not defined for real near . No natural slip gives it.

Option B

gives in the expression, which is not defined. No natural slip gives it.

Option D

With the limit is , not . No natural slip gives it.

Skills used

Ideal time: about 2 min
77Differential Equations • Applications
Very easy

A particle starts from origin with a velocity (in m/s) given by the equation . The time (in second) taken by the particle to traverse a distance of 24 m is

Options
Show answer & solution

Option C

Approach

Separate the variables, use at , then put .

Step-by-step solution

  1. 1

    Why: Bring all terms to one side.

  2. 2
  3. 3
    at : , so .

    Why: The particle starts from the origin. Its velocity stays positive, so it moves forward and the distance covered is .

  4. 4
    :

Common mistakes

Option A

Drops the and writes , giving .

Option B

Takes as , forgetting that brings out a factor .

Option D

No natural slip gives .

Skills used

Ideal time: about 1 min
78Integral Calculus • Definite Integrals
Easy

What is equal to?

Options
Show answer & solution

Option D

Approach

Replace by to get a second form of the same integral, then add the two.

Step-by-step solution

  1. 1
  2. 2

    Why: ; the bottom is unchanged and the top becomes .

  3. 3

    Why: Adding the two forms makes the fraction .

  4. 4

Common mistakes

Option A

Stops at and forgets to divide by .

Option B

No natural slip gives .

Option C

Thinks the two forms cancel each other instead of adding to .

Skills used

Ideal time: about 1 min
79Differential Calculus • Limits
Very easy

What is equal to?

Options
Show answer & solution

Option B

Approach

Putting gives , so factorise, cancel and substitute again.

Step-by-step solution

  1. 1
    At : top , bottom .

    Why: The form says is a factor of both.

  2. 2

    Why: Cancel ; in a limit .

  3. 3
    At :

Common mistakes

Option A

Sees on top and stops, reading as .

Option C

No natural slip gives .

Option D

No natural slip gives .

Skills used

Ideal time: about 1 min
80Integral Calculus • Definite Integrals
Moderate

If then what is equal to?

Options
Show answer & solution

Option A

Approach

Fold onto and compare with the left side.

Step-by-step solution

  1. 1
  2. 2

    Why: Put in the left half.

  3. 3

    Why: This is exactly the given left side, so works for every .

Common mistakes

Option B

With , the right side is : twice the left side.

Option C

gives : the wrong sign.

Option D

Option A works for every , so 'None of the above' is wrong.

Skills used

Ideal time: about 53 s