Skip to content

Mathematics 2018 (II)

Set A

Questions 61–80 of 120

61Analytical Geometry • Two Dimensions • Coordinates and Distance
Moderate

What is the area of the triangle with vertices , , ?

Options
Show answer & solution

Option D

Approach

Write the area as half the modulus of a determinant, clear the fractions by multiplying each row by its , and recognise the determinant that is left.

Step-by-step solution

  1. 1
    , where

    Why: The area of a triangle from its vertices is half the modulus of this determinant.

  2. 2

    Why: Multiply row by to remove the fractions. Each row multiplied by multiplies the determinant by .

  3. 3

    Why: Reordering the columns can only change the sign, which the modulus removes. The determinant with columns , , is the standard product of differences.

  4. 4

    Why: Divide back by and take half the modulus.

Common mistakes

Option A

Multiplies the rows by , , but never divides by again, and also drops the .

Option B

Assumes three points on the same curve must be collinear. Three points of a curve are collinear only if the curve is a line.

Option C

Takes the area as the modulus of the determinant, forgetting the factor .

Skills used

Ideal time: about 2.5 min
62Analytical Geometry • Two Dimensions • Circle
Very easy

If -axis touches the circle , then the normal at this point intersects the circle at the point

Options
Show answer & solution

Option B

Approach

Find the point where the circle touches the -axis; the normal there passes through the centre, so it meets the circle again at the other end of that diameter.

Step-by-step solution

  1. 1
    Centre

    Why: Compare with , whose centre is : here and .

  2. 2
    Point of contact

    Why: The radius to the point of contact is perpendicular to the -axis, so it is horizontal: is on the -axis at the centre's height.

  3. 3
    The normal at is the line :

    Why: The normal at a point of a circle always passes through the centre.

  4. 4

    Why: The line through and the centre is a diameter. Its other end has as the mid-point of .

Common mistakes

Option A

Gives the centre. The normal passes through the centre, but the centre is inside the circle, not on it.

Option C

No natural slip leads here: the point has the centre's -coordinate and the wrong sign on .

Option D

Reflects the origin in the centre instead of the point of contact .

Skills used

Ideal time: about 1.5 min
63Vector Algebra • Dot Product
Very easy

Let , . holds if and only if

Options
Show answer & solution

Option A

and are perpendicular

Approach

Expand the left side as a dot product and compare it with the right side.

Step-by-step solution

  1. 1

    Why: Multiply out like brackets; and .

  2. 2
    The equation holds
  3. 3
    with

    Why: For non-zero vectors, a zero dot product means the angle between them is .

Common mistakes

Option B

For parallel vectors , so the left side is . No natural slip leads here.

Option C

At , , so an extra term remains. No natural slip leads here.

Option D

For anti-parallel vectors , so the left side is . No natural slip leads here.

Skills used

Ideal time: about 1 min
64Vector Algebra • Dot Product
Very easy

If , then what is equal to ?

Options
Show answer & solution

Option D

Approach

Take the dot product component by component.

Step-by-step solution

  1. 1

    Why: Multiply matching components and add.

  2. 2

Common mistakes

Option A

Keeps only the component, as if dotting with alone.

Option B

Drops the component.

Option C

Puts a wrong minus sign in front of the sum.

Skills used

Ideal time: about 38 s
65Vector Algebra • Cross Product
Easy

A unit vector perpendicular to each of the vectors and is

Options
Show answer & solution

Option A

Approach

A vector perpendicular to both is along their cross product; divide it by its length.

Step-by-step solution

  1. 1

    Why: The cross product of two vectors is perpendicular to each of them.

  2. 2

    Why: Expand along the first row; the term carries a minus sign.

  3. 3
  4. 4
    Unit vector

    Why: Divide by the length.

Common mistakes

Option B

Not perpendicular: its dot product with is . No natural slip leads here.

Option C

Forgets the minus sign on the term of the determinant, getting .

Option D

Gets the component's sign wrong, as instead of .

Skills used

Ideal time: about 2 min
66Vector Algebra • Dot Product
Easy

If , and , then what is the value of ?

Options
Show answer & solution

Option D

Approach

Add the squared lengths of the sum and the difference, so that cancels.

Step-by-step solution

  1. 1

    Why: Expanding each square gives , and the two cancel.

  2. 2
  3. 3
    , so

Shortcut

, so , which means . Then as well.

Common mistakes

Option A

No natural slip leads here.

Option B

No natural slip leads here.

Option C

Stops at and forgets to subtract .

Skills used

Ideal time: about 1 min
67Vector Algebra • Dot Product
Very easy

Let , and be three mutually perpendicular vectors each of unit magnitude. If , and , then which one of the following is correct ?

Options
Show answer & solution

Option C

Approach

Find each length by squaring: for mutually perpendicular unit vectors, every mixed dot product is .

Step-by-step solution

  1. 1

    Why: The squared terms each give ; the mixed terms , , are .

  2. 2
    ,

    Why: A minus sign is squared away, so it does not change the length.

  3. 3

Common mistakes

Option A

Takes each length as the sum of the coefficients, , , , as if minus signs shortened the vector.

Option B

No natural slip makes alone differ: and are built the same way.

Option D

Takes each length as the sum of the coefficients, , , , all different.

Skills used

Ideal time: about 1 min
68Vector Algebra • Cross Product
Easy

What is equal to ?

Options
Show answer & solution

Option C

Approach

Expand the cross product term by term, using and .

Step-by-step solution

  1. 1

    Why: The cross product distributes over addition; keep the order of each pair.

  2. 2

    Why: A vector crossed with itself is , and swapping the order changes the sign.

  3. 3

Common mistakes

Option A

Treats the cross product as commutative, , so the middle terms cancel.

Option B

Drops one of the two equal middle terms.

Option D

Treats the product as a difference of squares, as with numbers or dot products. A cross product is a vector, not the number .

Skills used

Ideal time: about 1 min
69Vector Algebra • Applications
Easy

A spacecraft located at is subjected to a force by firing a rocket. The spacecraft is subjected to a moment of magnitude

Options
Show answer & solution

Option C

Approach

The moment about the origin is ; find it in components and take its length.

Step-by-step solution

  1. 1

    Why: The moment of a force acting at the point , about the origin, is .

  2. 2

    Why: , , .

  3. 3

    Why: Length from the components, with the size of the force.

Common mistakes

Option A

Gives the size of the force, , instead of its moment.

Option B

No natural slip leads here.

Option D

Chosen after taking the moment as , forgetting that only the part of perpendicular to the force counts.

Skills used

Ideal time: about 1.5 min
70Vector Algebra • Vector Basics
Very easy

In a triangle , if taken in order, consider the following statements :

1
2
3
4

How many of the above statements are correct ?

Options
Show answer & solution

Option A

One

Approach

Read each sum as a walk round the triangle, turning each minus sign into a reversed arrow.

Step-by-step solution

  1. 1
    1: . True.

    Why: The walk ends where it started.

  2. 2
    2: . False.

    Why: , and .

  3. 3
    3: . False.

    Why: , and .

  4. 4
    4: . False.

    Why: , and .

  5. 5
    Only statement 1 is correct: one statement.

Common mistakes

Option B

Takes as instead of , which makes statement 4 look true.

Option C

No natural slip makes exactly three hold.

Option D

Thinks every sum of the three sides vanishes whatever the signs, forgetting that a minus sign reverses an arrow.

Skills used

Ideal time: about 1.5 min
71Differential Calculus • Derivatives
Easy

Let the slope of the curve be . Then the value of in the interval is

Options
Show answer & solution

Option B

Approach

Simplify on the principal interval of , read off the slope, and find the angle in whose tangent it is.

Step-by-step solution

  1. 1

    Why: for every in .

  2. 2
    For : , so

    Why: equals only on .

  3. 3
  4. 4
    ,

    Why: A negative slope means the angle with the positive -axis is obtuse.

  5. 5
    For : , so , slope ,

    Why: This key is contestable. The curve is a zigzag: its slope is on some stretches and on others, and the question does not say which it means. B is keyed because it is the slope on the principal interval around , where ; on the next stretch the answer would be C.

Common mistakes

Option A

is not a slope of this curve anywhere. No natural slip leads here.

Option C

Also defensible

This is the inclination on the next stretch of the curve. For , , so with slope and . The printed words do not fix , so this reading is also defensible. It is not keyed because the question's 'the slope' fits the usual simplification on the principal interval around .

Option D

is not defined, so it is the slope of no line except a vertical one. No natural slip leads here.

Skills used

Ideal time: about 1 min
72Algebra • Functions
Very easy

If defines a function on , then what is its domain ?

Options
Show answer & solution

Option D

Approach

Collect the two conditions: the square root needs a non-negative number, and the denominator must not be zero.

Step-by-step solution

  1. 1

    Why: A square root is real only for a number ; at the numerator is , which is allowed.

  2. 2

    Why: Division by zero is not allowed.

  3. 3
    Domain

Common mistakes

Option A

Uses only the denominator condition and forgets the square root.

Option B

No natural slip leads here: it even keeps , where the denominator is .

Option C

Makes the root condition strict, , as if the root were in the denominator. At , is defined.

Skills used

Ideal time: about 1 min
73Differential Calculus • Continuity and Differentiability
Very easy

Consider the function :

Which one of the following is correct in respect of the function ?

Options
Show answer & solution

Option A

It is not continuous at

Approach

Compare the limit at with the given value .

Step-by-step solution

  1. 1

    Why: Make the denominator match the angle, then use .

  2. 2
    , so is not continuous at

    Why: Continuity at a point needs the limit to equal the value there.

  3. 3
    For , is a quotient of continuous functions with a non-zero denominator, so it is continuous at every other , including

    Why: This rules out C, and the failure at rules out B and D.

Common mistakes

Option B

Checks only the points , where the rule is a quotient of continuous functions, and misses the point .

Option C

Thinks means a break. A zero value is not a discontinuity: near the rule is continuous.

Option D

Accepts the given value as the limit without computing .

Skills used

Ideal time: about 1 min
74Differential Calculus • Continuity and Differentiability
Very easy

For the function , which one of the following is not correct ?

Options
Show answer & solution

Option A

The function is not continuous at

Approach

is a V with its corner at : continuous everywhere, differentiable everywhere except at . Test each statement against that.

Step-by-step solution

  1. 1
    is continuous at every , and differentiable at every

    Why: Away from the rule is a straight line; at the slopes and differ.

  2. 2
    A, 'not continuous at ', is false, since is continuous everywhere
  3. 3
    B is true. C and D are true, because and
  4. 4
    The statement that is not correct is A

Common mistakes

Option B

is continuous at ; only its derivative fails there. Choosing B mixes up continuity with differentiability.

Option C

Puts the corner at , as for , instead of at .

Option D

Puts the corner at instead of , a sign slip.

Skills used

Ideal time: about 59 s
75Differential Calculus • Continuity and Differentiability
Easy

If the function is continuous at each point in its domain, then what is the value of ?

Options
Show answer & solution

Option B

Approach

A function continuous at has equal to the limit there; find the limit by dividing top and bottom by .

Step-by-step solution

  1. 1

    Why: Continuity at means the value equals the limit.

  2. 2

    Why: Divide the numerator and the denominator by , so that the standard limits appear.

  3. 3

    Why: and .

Common mistakes

Option A

Gets the numerator as instead of .

Option C

Drops from the numerator, getting .

Option D

No natural slip leads here.

Skills used

Ideal time: about 1.5 min
76Differential Calculus • Derivatives
Easy

If , then what is equal to ?

Options
Show answer & solution

Option A

Approach

The limit is the definition of ; differentiate by the chain rule and put .

Step-by-step solution

  1. 1

    Why: This is the derivative at by definition.

  2. 2

    Why: Differentiate the square root, then multiply by the derivative of the inside, .

  3. 3

Common mistakes

Option B

Drops the minus sign that comes from differentiating .

Option C

. No natural slip leads here.

Option D

. No natural slip leads here.

Skills used

Ideal time: about 1.5 min
77Differential Calculus • Derivatives
Easy

If , then what is equal to ?

Options
Show answer & solution

Option A

Approach

Divide the top and the bottom by to see the formula for , so that becomes a constant minus .

Step-by-step solution

  1. 1

    Why: Divide the top and the bottom by , to make the denominator start with .

  2. 2

    Why: , with and .

  3. 3

    Why: is a constant, and .

Common mistakes

Option B

Forgets the chain factor and also drops the minus sign.

Option C

Differentiates as if it were , forgetting the chain factor .

Option D

Writes as a constant plus , losing the minus sign of .

Skills used

Ideal time: about 1.5 min
78Differential Calculus • Applications of Derivatives
Easy

Which one of the following is correct in respect of the function ?

Options
Show answer & solution

Option A

It is increasing in the interval

Approach

Find , factorise it, and read its sign on .

Step-by-step solution

  1. 1

    Why: Product rule on ; chain rule on .

  2. 2
  3. 3
    On : and

    Why: for every .

  4. 4
    , so is increasing on

    Why: A positive derivative throughout an interval means the function increases there.

Common mistakes

Option B

No natural slip makes vanish on the whole interval.

Option C

Differentiates as only, forgetting the product rule, so .

Option D

on all of , including . No natural slip leads here.

Skills used

Ideal time: about 2 min
79Differential Calculus • Limits
Hard

What is equal to ?

Options
Show answer & solution

No option is correct

Approach

Write with a half-angle; the square root of a square is a modulus, so the two one-sided limits differ and the printed limit does not exist.

Step-by-step solution

  1. 1

    Why: From with .

  2. 2

    Why: The square root of a square is the modulus, never the number itself.

  3. 3
    :

    Why: For small positive , , so the modulus can be dropped.

  4. 4
    :

    Why: For small negative , , so .

  5. 5
    , so does not exist

    Why: A limit exists only when the left and right limits are equal. No printed option says the limit does not exist, so no option is correct. The paper probably meant , whose value is option C; as printed, C is only the right-hand limit.

Common mistakes

Option A

Drops the when changing into . Even the right-hand limit is , not .

Option B

Multiplies by instead of dividing when changing into .

Option C

This is the right-hand limit only. It comes from writing and forgetting the modulus. From the left the limit is , so the two-sided limit asked for does not exist.

Option D

Neither one-sided limit is ; the left-hand limit is . No natural slip leads here.

Skills used

Ideal time: about 2.5 min
80Algebra • Functions
Moderate

A function is defined by the equation where . What is the range of the function ?

Options
Show answer & solution

Option C

Approach

Complete the square to find the least value, then see which ends of the interval are reached.

Step-by-step solution

  1. 1

    Why: Completing the square shows the least value and where it occurs.

  2. 2
    lies in , so the least value is reached
  3. 3
    As moves from towards , rises towards ; towards , it rises only to

    Why: The far end gives the largest values, but is not in the domain.

  4. 4
    is approached but never reached, so the range is

    Why: On an open interval, the value at an excluded end is not attained.

Common mistakes

Option A

Uses only the end values and , missing the dip to at .

Option B

Excludes as well, copying the round brackets of the domain. The value is reached at , which is inside .

Option D

Includes , which needs , and is not in .

Skills used

Ideal time: about 1.5 min