Skip to content

Mathematics 2018 (I)

Set A

Questions 61–80 of 120

61Analytical Geometry • Three Dimensions • Coordinates and Distance
Easy

The coordinates of the vertices , and of a triangle are , and respectively. If , then what is equal to ?

Options
Show answer & solution

Option D

Approach

Find the squares of the three sides. If they fit Pythagoras' theorem, one angle is , and the other two angles add up to .

Step-by-step solution

  1. 1

    Why: Distance formula in space: square each difference of coordinates and add. The square is enough here, so skip the root.

  2. 2
  3. 3
  4. 4
    , so

    Why: By the converse of Pythagoras' theorem, the angle facing the longest side is a right angle.

  5. 5

    Why: The angles of a triangle add up to , and .

Common mistakes

Option A

No natural slip gives : with a right angle at , the other two angles must add up to , and does not.

Option B

No natural slip gives : it makes the two angles at and add up to , so the angle at would be , not .

Option C

No natural slip gives : it makes the angle at equal to , but the sides show it is .

Skills used

Ideal time: about 1.5 min
62Analytical Geometry • Two Dimensions • Straight Lines
Easy

The perpendiculars that fall from any point of the straight line upon the two straight lines and are

Options
Show answer & solution

Option C

Equal to each other

Approach

Check whether the given line bisects the angle between the two lines. Every point of such a bisector is equally far from both lines.

Step-by-step solution

  1. 1
    From : and

    Why: Distance of a point from a line: and .

  2. 2

    Why: Scale the second expression by so both have denominator , then compare them.

  3. 3
    On the right side is , so
  4. 4
    Dividing by : , so at every point of the line

    Why: The given line is a bisector of the angle between the two lines.

Shortcut

Take one point of the line, such as . Both distances are . This strikes D, and since the distances change from point to point, it strikes the fixed lengths in A and B too.

Common mistakes

Option A

The two distances are not fixed numbers: they are each at and change along the line. No natural slip gives and .

Option B

The two distances are not fixed numbers: they are each at and change along the line. No natural slip gives and .

Option D

Assumes two different lines must be at different distances, without noticing that the given line bisects the angle between them.

Skills used

Ideal time: about 1.5 min
63Analytical Geometry • Two Dimensions • Straight Lines
Easy

The equation of the line, when the portion of it intercepted between the axes is divided by the point in the ratio of , is

Options
Show answer & solution

Option D

Either or

Approach

Let the line cut the axes at and . Put into the section formula for each order of the ratio, then write the line in intercept form.

Step-by-step solution

  1. 1
    Case 1, :

    Why: Section formula: the share goes with the far end . The question does not say which end comes first, so both orders count; that is why every option says 'either'.

  2. 2
    , : , that is
  3. 3
    Case 2, : , so and
  4. 4
    ; multiplying by gives

Common mistakes

Option A

Neither line passes through : and . No natural slip gives it.

Option B

Swaps the coefficients of and in the second line. misses : .

Option C

Neither line passes through : and . No natural slip gives it.

Skills used

Ideal time: about 1.5 min
64Analytical Geometry • Two Dimensions • Straight Lines
Very easy

What is the distance between the straight lines and ?

Options
Show answer & solution

Option B

Approach

Make the coefficients of and the same in both lines, then use the distance between parallel lines.

Step-by-step solution

  1. 1

    Why: The formula needs the same and in both equations, so multiply the first by .

  2. 2
    The other line is
  3. 3

Common mistakes

Option A

Makes the coefficients equal () but forgets to divide by .

Option C

Subtracts the constants without first making the coefficients equal, and does not divide by the root either.

Option D

is , the denominator of the formula. No natural slip gives it as the distance.

Skills used

Ideal time: about 51 s
65Analytical Geometry • Three Dimensions • Sphere
Very easy

What is the equation to the sphere whose centre is at and radius is 6 units ?

Options
Show answer & solution

Option A

Approach

Every point of the sphere is from the centre. Square that distance and expand.

Step-by-step solution

  1. 1

    Why: Distance formula from , squared.

  2. 2
  3. 3

Common mistakes

Option B

Swaps the and coordinates of the centre, giving ; this sphere has centre .

Option C

Has the right , , terms but the constant , so its radius is , not . No natural slip gives .

Option D

Changes the signs of the and terms, which moves the centre to ; its constant is wrong as well.

Skills used

Ideal time: about 1 min
66Vector Algebra • Cross Product
Very easy

If and are vectors such that , and , then what is the acute angle between and ?

Options
Show answer & solution

Option A

Approach

Use .

Step-by-step solution

  1. 1
  2. 2
    , so

    Why: The size of a cross product uses the sine of the angle between the vectors.

  3. 3

Common mistakes

Option B

would need , that is . No natural slip gives it.

Option C

Uses the cosine in place of the sine: gives . The cosine belongs to the dot product.

Option D

Thinks that taking a cross product makes and perpendicular. The cross product is perpendicular to both of them; and themselves are at .

Skills used

Ideal time: about 52 s
67Vector Algebra • Dot Product
Easy

Let and be the position vectors of the points and respectively with respect to origin . The points and divide internally and externally respectively in the ratio . If and are perpendicular, then which one of the following is correct ?

Options
Show answer & solution

Option A

Approach

Write and by the section formulas, then set their dot product to zero.

Step-by-step solution

  1. 1

    Why: Internal division in : the share goes with the far end . Position vectors follow the same formula as coordinates.

  2. 2

    Why: External division: the internal formula with replaced by .

  3. 3

    Why: Perpendicular vectors have zero dot product. The factor does not change that.

  4. 4

    Why: Expand. The middle terms cancel because . Here means .

  5. 5

Common mistakes

Option B

Attaches the share to instead of , which divides in : , giving .

Option C

Drops the squares. The dot product gives lengths squared, and , not the vectors themselves.

Option D

Drops the squares and also attaches the shares to the wrong ends.

Skills used

Ideal time: about 2 min
68Vector Algebra • Applications
Easy

What is the moment about the point of a force represented by acting through the point ?

Options
Show answer & solution

Option A

Approach

The moment about a point is (the vector from that point to the point where the force acts) (the force).

Step-by-step solution

  1. 1

    Why: Point of action minus the point the moment is taken about.

  2. 2

    Why: comes first: would give the opposite vector.

  3. 3

Common mistakes

Option B

Only the part matches. Reversing the order gives , not this; no natural slip gives .

Option C

Only the part matches. No natural slip in the vector or the determinant gives .

Option D

No working of this force and these points gives .

Skills used

Ideal time: about 1.5 min
69Vector Algebra • Cross Product
Easy

If and , then what is the value of ?

Options
Show answer & solution

Option D

Approach

Replace by and write every cross product as a multiple of .

Step-by-step solution

  1. 1
  2. 2

    Why: , and reversing the order changes the sign.

  3. 3
  4. 4
    Sum , so

Common mistakes

Option A

Keeps only the part, .

Option B

Keeps only the part, .

Option C

Adds and to get , and forgets .

Skills used

Ideal time: about 2 min
70Vector Algebra • Cross Product
Very easy

If the vectors and are parallel to each other, then what is equal to ?

Options
Show answer & solution

Option B

Approach

Take the number out, then use that the cross product of parallel vectors is zero.

Step-by-step solution

  1. 1

    Why: A number can be taken out of a cross product.

  2. 2
    , so

    Why: Parallel vectors are at or , and .

  3. 3

Common mistakes

Option A

Reads as the number and the cross as ordinary multiplication, getting .

Option C

The same misreading with a minus sign added. No natural route gives .

Option D

No natural route gives : the cross product of parallel vectors has no size at all.

Skills used

Ideal time: about 39 s
71Algebra • Functions
Easy

Which one of the following is correct in respect of the function defined as ?

Options
Show answer & solution

Option D

None of the above

Approach

Test each identity at one convenient value. One value where the two sides differ is enough to rule it out.

Step-by-step solution

  1. 1
    A: at , , but

    Why: An identity must hold for every ; one failure breaks it.

  2. 2
    B: at , , but

    Why: Try a negative , where and differ.

  3. 3
    C: at , , but
  4. 4
    A, B and C all fail, so the answer is 'None of the above'

Common mistakes

Option A

Checks only , where and agree, and stops there. At the sides are and .

Option B

Checks only , where . It fails for negative , for example .

Option C

Treats the modulus as if it split over a sum, . At the sides are and .

Skills used

Ideal time: about 1.5 min
72Algebra • Functions
Very easy

Suppose is defined by . What is the range of the function ?

Options
Show answer & solution

Option A

Approach

Rewrite so that appears only once, then build its range from the range of .

Step-by-step solution

  1. 1

    Why: Splitting the fraction leaves in one place only.

  2. 2
    , so

    Why: The reciprocal of positive numbers reverses the inequality, and it is never .

  3. 3

    Why: Multiply by , which reverses the inequality, then add .

  4. 4
    is reached at and is never reached: the range is

Common mistakes

Option B

Includes because gets close to for large . But would need , which is impossible.

Option C

Swaps the ends: includes , which is never reached, and leaves out , though .

Option D

Leaves out , missing that .

Skills used

Ideal time: about 54 s
73Differential Calculus • Continuity and Differentiability
Very easy

If , then which one of the following is correct ?

Options
Show answer & solution

Option A

is continuous at and

Approach

Each modulus term is continuous everywhere, and a sum of continuous functions is continuous.

Step-by-step solution

  1. 1
    and are continuous at every real

    Why: The modulus of a linear expression has a corner but no break.

  2. 2
    So is continuous everywhere, in particular at and at

    Why: A sum of continuous functions is continuous.

Common mistakes

Option B

Takes the corner at for a break. A corner stops differentiability, not continuity.

Option C

Takes the corner at for a break. A corner stops differentiability, not continuity.

Option D

Confuses continuity with differentiability. is not differentiable at or , but it is continuous at both.

Skills used

Ideal time: about 48 s
74Differential Calculus • Continuity and Differentiability
Moderate

Consider the function

.

What is equal to ?

Options
Show answer & solution

Option A

Approach

The formula for changes at , so find from the definition of the derivative.

Step-by-step solution

  1. 1

    Why: At a point where the formula changes, use the definition of the derivative.

  2. 2
  3. 3

    Why: Write , a form . L'Hôpital's rule gives : the factor shrinks faster than grows.

Common mistakes

Option B

No natural slip gives .

Option C

No natural slip gives .

Option D

Thinks cannot exist because is undefined at . But is given separately as , and the limit of the difference quotient exists.

Skills used

Ideal time: about 1 min
75Integral Calculus • Area Under Curves
Moderate

What is the area of the region bounded by the parabolas and ?

Options
Show answer & solution

Option C

Approach

Use horizontal strips: for each between the meeting points, the width of the region is the right curve's minus the left curve's .

Step-by-step solution

  1. 1
    Meeting points: gives , so and
  2. 2
    Right curve , left curve ; width

    Why: At the curves are at and , so is the right one. This is the area between two curves with and swapped: right minus left.

  3. 3
    Area

    Why: The width is the same for and : the region is symmetric about the -axis.

  4. 4

Common mistakes

Option A

is alone: only the subtracted piece of the upper half.

Option B

Finds the area above the -axis, , and forgets to double it for the part below.

Option D

Integrates as : .

Skills used

Ideal time: about 2.5 min
76Differential Calculus • Applications of Derivatives
Moderate

Consider the following information for the next three (03) items that follow :

Three sides of a trapezium are each equal to 6 cm. Let be the angle between a pair of adjacent sides.

If the area of the trapezium is the maximum possible, then what is equal to ?

Options
Show answer & solution

Option C

Approach

Write the area as a function of , set its derivative to zero, and read the quantity asked at that .

Step-by-step solution

  1. 1
    Slant sides and shorter parallel side . Dropping perpendiculars from the ends of the shorter side gives height and two end pieces of each

    Why: Each slant side is the hypotenuse of a right triangle with angle at the longer parallel side. is acute, so it is the angle at the longer side, not the obtuse angle at the shorter one.

  2. 2
    Longer parallel side ; area

    Why: Area of a trapezium: half the sum of the parallel sides times the height.

  3. 3

    Why: Product rule, then .

  4. 4

    Why: At the greatest area inside the interval the derivative is . Write and factorise.

  5. 5
    , as ; so . is positive before and negative after, so this is the maximum

Common mistakes

Option A

At , : the area is still growing. No natural slip stops here.

Option B

Keeps only the two end triangles, whose area is greatest at , and forgets the rectangle in the middle, , which still grows past .

Option D

At , : the area is already falling. No natural slip gives it.

Skills used

Ideal time: about 3 min
77Differential Calculus • Applications of Derivatives
Very easy

Same directions as Q76

If the area of the trapezium is maximum, what is the length of the fourth side ?

Options
Show answer & solution

Option D

cm

Approach

Write the area as a function of , set its derivative to zero, and read the quantity asked at that .

Step-by-step solution

  1. 1
    Slant sides and shorter parallel side . Dropping perpendiculars from the ends of the shorter side gives height and two end pieces of each

    Why: Each slant side is the hypotenuse of a right triangle with angle at the longer parallel side. is acute, so it is the angle at the longer side, not the obtuse angle at the shorter one.

  2. 2
    Longer parallel side ; area

    Why: Area of a trapezium: half the sum of the parallel sides times the height.

  3. 3

    Why: Product rule, then .

  4. 4

    Why: At the greatest area inside the interval the derivative is . Write and factorise.

  5. 5
    , as ; so . is positive before and negative after, so this is the maximum
  6. 6
    Fourth side cm

Common mistakes

Option A

No natural slip gives cm.

Option B

Adds only one end piece: .

Option C

No natural slip gives cm.

Skills used

Ideal time: about 38 s
78Differential Calculus • Applications of Derivatives
Very easy

Same directions as Q76

What is the maximum area of the trapezium ?

Options
Show answer & solution

Option C

Approach

Write the area as a function of , set its derivative to zero, and read the quantity asked at that .

Step-by-step solution

  1. 1
    Slant sides and shorter parallel side . Dropping perpendiculars from the ends of the shorter side gives height and two end pieces of each

    Why: Each slant side is the hypotenuse of a right triangle with angle at the longer parallel side. is acute, so it is the angle at the longer side, not the obtuse angle at the shorter one.

  2. 2
    Longer parallel side ; area

    Why: Area of a trapezium: half the sum of the parallel sides times the height.

  3. 3

    Why: Product rule, then .

  4. 4

    Why: At the greatest area inside the interval the derivative is . Write and factorise.

  5. 5
    , as ; so . is positive before and negative after, so this is the maximum
  6. 6
    cm

Common mistakes

Option A

Multiplies the longer side by the height, , as if the shape were a rectangle.

Option B

No natural slip gives .

Option D

No natural slip gives .

Skills used

Ideal time: about 43 s
79Integral Calculus • Definite Integrals
Moderate

What is equal to ?

Options
Show answer & solution

Option A

Approach

Integrate by parts twice. The integral comes back, so collect it on one side and solve for it.

Step-by-step solution

  1. 1

    Why: By parts: integrate , differentiate .

  2. 2

    Why: By parts again, again integrating the trigonometric factor. The starting integral comes back.

  3. 3
    , so
  4. 4

    Why: and .

Common mistakes

Option B

Drops the minus sign at the lower limit: subtracts instead of adding it.

Option C

Forgets to divide by after collecting .

Option D

No natural slip divides by .

Skills used

Ideal time: about 2.5 min
80Differential Calculus • Continuity and Differentiability
Easy

If , is continuous at , then which one of the following is correct ?

Options
Show answer & solution

Option B

Approach

For continuity, must equal the limit at . Find the limit by cancelling the common factor.

Step-by-step solution

  1. 1

    Why: Top and bottom are both at , so both have the factor .

  2. 2
    For , , so
  3. 3
    Continuity at needs

Common mistakes

Option A

Puts into the top only, or reads as . only says more work is needed.

Option C

Factorises the bottom as instead of : .

Option D

No natural slip gives a negative value: near both and are positive.

Skills used

Ideal time: about 1.5 min