Skip to content

Mathematics 2017 (I)

Set A

Questions 61–80 of 120

61Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Very easy

A straight line with direction cosines is

Options
Show answer & solution

Option B

parallel to -axis

Approach

Direction cosines are the cosines of the angles a line makes with the -, - and -axes; read the three angles off.

Step-by-step solution

  1. 1
    , ,

    Why: The three direction cosines are the cosines of the angles with the -, - and -axes, in that order.

  2. 2
    , ,

    Why: An angle of with the -axis and with the other two axes means the line runs along the -direction.

  3. 3
    The line is parallel to the -axis

Common mistakes

Option A

Takes the first entry as the one that matters. Parallel to the -axis needs .

Option C

Reads the cosines in the wrong order. Parallel to the -axis needs .

Option D

Equally inclined lines have equal direction cosines, ; here they are , which are not equal.

Skills used

Ideal time: about 39 s
62Analytical Geometry • Three Dimensions • Coordinates and Distance
Easy

, , and are four distinct points. What are the coordinates of the point which is equidistant from the four points?

Options
Show answer & solution

Option C

Approach

Let the point be and set its distance from the origin equal to its distance from each of the other three points.

Step-by-step solution

  1. 1

    Why: Distance from equals distance from . Squaring both distances removes the roots.

  2. 2

    Why: Cancel from both sides; because the points are distinct.

  3. 3
    In the same way and

    Why: The points and give the same equation in and in .

  4. 4
    The point is

Common mistakes

Option A

No natural route gives this; its distances from the origin and from differ in general.

Option B

Takes the far corner of the box. Its distance from the origin is , but from it is only .

Option D

Takes the centroid of the triangle with vertices , , . The centroid is not equidistant from the vertices, and the origin is left out.

Skills used

Ideal time: about 1.5 min
63Analytical Geometry • Three Dimensions • Coordinates and Distance
Very easy

The points , , and are

Options
Show answer & solution

Option C

collinear

Approach

Find the direction ratios of , and ; if they are proportional, the points lie on one line.

Step-by-step solution

  1. 1

    Why: Direction ratios of : subtract coordinates.

  2. 2

    Why: Direction ratios of : the same as , and is common, so , , are on one line.

  3. 3

    Why: also has proportional direction ratios and shares , so is on the same line.

  4. 4
    All four points are collinear

Common mistakes

Option A

Four points of a rhombus cannot lie on one straight line; here every pair of points lies along .

Option B

Points on one line always lie in a plane, so they cannot be non-coplanar.

Option D

Collinear points are coplanar, but the option also says they are not collinear, and they are.

Skills used

Ideal time: about 1 min
64Analytical Geometry • Three Dimensions • Straight Line in Space
Easy

The line passing through the points and meets the -plane at which one of the following points?

Options
Show answer & solution

Option D

Approach

Write the general point of the line, then choose the parameter that makes , since the -plane is .

Step-by-step solution

  1. 1

    Why: The line goes through with direction ratios .

  2. 2

    Why: Every point of the -plane has .

  3. 3
    ,

    Why: Put into and ; watch the signs.

  4. 4
    The point is

Common mistakes

Option A

Negates both and : a sign slip in each coordinate when putting in .

Option B

Sign slip in only: taking instead of .

Option C

Sign slip in only: is written as while is right.

Skills used

Ideal time: about 1.5 min
65Analytical Geometry • Three Dimensions • Straight Line in Space
Easy

Under which one of the following conditions are the lines ; and ; perpendicular?

Options
Show answer & solution

Option C

Approach

Find the direction ratios of each line, then use the perpendicularity condition .

Step-by-step solution

  1. 1
    : direction ratios

    Why: Put ; as grows by the point moves , , .

  2. 2
    The second line has direction ratios

    Why: Same reading for , .

  3. 3
    , that is

    Why: Lines are perpendicular when the sum of products of their direction ratios is .

Common mistakes

Option A

Sign slip: writes the middle product as instead of .

Option B

Uses the constants and , which only fix a point on each line, in place of and , which set the direction.

Option D

Pairs with and with : multiplies the -ratio of one line by the -ratio of the other.

Skills used

Ideal time: about 58 s
66Vector Algebra • Triple Products
Easy

If , and are three coplanar vectors and , then which one of the following is correct?

Options
Show answer & solution

Option D

and

Approach

Coplanar vectors have scalar triple product ; that gives . Then gives .

Step-by-step solution

  1. 1

    Why: Three vectors are coplanar exactly when their scalar triple product is .

  2. 2

    Why: Expand along the first row. The terms cancel.

  3. 3
  4. 4

    Why: and .

Common mistakes

Option A

Swaps which unknown takes two signs: is fixed at by the triple product, and it is that can be .

Option B

Sign slips on the constant terms of the expansion turn into , which gives .

Option C

Gets by the same sign slips as (B), and also drops the negative root of .

Skills used

Ideal time: about 2 min
67Vector Algebra • Vector Basics
Very easy

Let be a parallelogram whose diagonals intersect at and let be the origin. What is equal to?

Options
Show answer & solution

Option B

Approach

is the midpoint of both diagonals; pair with and with .

Step-by-step solution

  1. 1
    is the midpoint of and of

    Why: The diagonals of a parallelogram bisect each other.

  2. 2

    Why: Position vector of the midpoint of .

  3. 3

    Why: Position vector of the midpoint of .

  4. 4
    Sum

Common mistakes

Option A

Uses only one diagonal: , and forgets the pair , .

Option C

No natural slip gives ; it does not match the two pairs of vertices.

Option D

Doubles each pair twice, as if were .

Skills used

Ideal time: about 1 min
68Vector Algebra • Vector Basics
Very easy

is a quadrilateral whose diagonals are and . Which one of the following is correct?

Options
Show answer & solution

Option B

Approach

Write every vector through position vectors of and compare both sides.

Step-by-step solution

  1. 1

    Why: is the position vector of minus that of .

  2. 2

    Why: Same rule for the right side of option (B).

  3. 3
    Both equal

    Why: The same four terms with the same signs, so (B) holds for every quadrilateral.

Common mistakes

Option A

, the negative of the left side: the direction of each diagonal is reversed.

Option C

: the signs of and are reversed, so the diagonal points the wrong way.

Option D

: the signs of and are reversed. It uses sides, not diagonals, and does not match.

Skills used

Ideal time: about 1 min
69Vector Algebra • Cross Product
Easy

If and , then which one of the following is correct?

Options
Show answer & solution

Option A

, , are orthogonal in pairs and and

Approach

A cross product is perpendicular to both its factors, which gives the right angles; its length gives the magnitudes. Take the vectors non-zero.

Step-by-step solution

  1. 1

    Why: A cross product is perpendicular to each of its two factors.

  2. 2

    Why: Same fact for the second equation. Now every pair is perpendicular.

  3. 3
    and

    Why: , and .

  4. 4
    , then

    Why: Substitute the second equation in the first and divide by .

Common mistakes

Option B

Ignores that a cross product is perpendicular to its factors; the given equations force all three right angles.

Option C

Gets the right angles but does not work out the lengths; once .

Option D

Gets the right angles but stops before the lengths; substituting one length equation into the other forces .

Skills used

Ideal time: about 1.5 min
70Vector Algebra • Dot Product
Very easy

If and are perpendicular, then what is the value of ?

Options
Show answer & solution

Option B

Approach

Perpendicular vectors have dot product ; write the dot product in components and solve for .

Step-by-step solution

  1. 1

    Why: Multiply matching components and add.

  2. 2

    Why: Two non-zero vectors are perpendicular exactly when their dot product is .

Common mistakes

Option A

No natural slip gives ; with the dot product is , not .

Option C

Divides by instead of by the coefficient of .

Option D

No natural slip gives ; with the dot product is .

Skills used

Ideal time: about 39 s
71Differential Calculus • Limits
Moderate

What is equal to?

Options
Show answer & solution

Option B

Approach

The limit is of the form ; apply L'Hôpital's rule once, then use the standard limit .

Step-by-step solution

  1. 1
    At : numerator , denominator

    Why: Check the form first: L'Hôpital's rule applies only to or .

  2. 2

    Why: Differentiate the numerator and the denominator separately.

  3. 3

    Why: Take the constant out and use the standard limit.

Common mistakes

Option A

Sees the numerator tend to and stops, forgetting that the denominator also tends to .

Option C

Uses but drops the factor from the derivative .

Option D

Turns the factor upside down and multiplies by .

Skills used

Ideal time: about 1 min
72Integral Calculus • Definite Integrals
Easy

What is equal to?

Options
Show answer & solution

Option B

Approach

Use to turn the integrand into , then integrate.

Step-by-step solution

  1. 1

    Why: A form of the double-angle formula, with as the angle.

  2. 2

    Why: ; with inside, divide by , that is multiply by .

  3. 3

Common mistakes

Option A

Forgets the factor from integrating , giving .

Option C

No natural slip gives ; it is , which would need the wrong upper value of .

Option D

The integral equals , which is option (B), so (D) is wrong.

Skills used

Ideal time: about 1 min
73Integral Calculus • Indefinite Integrals
Easy

What is equal to?

Options
Show answer & solution

Option D

Approach

Multiply top and bottom by so that works, then split into partial fractions.

Step-by-step solution

  1. 1

    Why: Multiplying by puts , which is , on top.

  2. 2
  3. 3

    Why: Partial fractions with two linear factors.

  4. 4

    Why: Integrate each fraction to a logarithm, combine, and put back .

Common mistakes

Option A

No natural slip gives this; its derivative involves , which the integrand does not have.

Option B

Takes the partial fractions with the wrong sign, ; the fraction inside the log is upside down.

Option C

No natural slip gives this; it has neither the factor nor the term .

Skills used

Ideal time: about 1.5 min
74Algebra • Functions
Very easy

The function defined by , where , is one-one and onto if and are respectively equal to

Options
Show answer & solution

Option A

and

Approach

A bijection needs to take each value only once on (one-one) and to cover all of (onto).

Step-by-step solution

  1. 1
    On , falls steadily from to

    Why: A function that only decreases never takes the same value twice, so it is one-one.

  2. 2
    Its values on are exactly

    Why: Every number from to is reached, so with it is onto.

  3. 3
    ,

Common mistakes

Option B

On , , so it is not one-one; its values are only , so it is not onto either. That interval suits , not .

Option C

and are not in , so does not even map into .

Option D

is negative on , so its values leave .

Skills used

Ideal time: about 54 s
75Algebra • Functions
Easy

If , then what is equal to?

Options
Show answer & solution

Option B

Approach

Compute as a single fraction, then compare it with of each option.

Step-by-step solution

  1. 1
    ,

    Why: Replace by , and by , in .

  2. 2

    Why: Dividing by a fraction is multiplying by its reciprocal; .

  3. 3

    Why: It has the shape with .

Common mistakes

Option A

, which is not ; no natural slip lands here.

Option C

, which is not ; no natural slip lands here.

Option D

, which is not ; no natural slip lands here.

Skills used

Ideal time: about 1 min
76Integral Calculus • Indefinite Integrals
Easy

What is equal to?

Options
Show answer & solution

Option D

Approach

Differentiate the denominator: it is times the numerator, so the integral is times the log of the denominator.

Step-by-step solution

  1. 1

    Why: Power rule for (the power is a constant), and .

  2. 2

    Why: Take out: . The bracket is exactly the numerator.

  3. 3

    Why: The numerator is of the derivative of the denominator; for the denominator is positive, so no modulus.

Common mistakes

Option A

No natural slip gives ; it would need the integrand to be .

Option B

No natural slip gives ; it would need the integrand to be .

Option C

Sees the log form but forgets that the derivative of the denominator is times the numerator, so drops the factor .

Skills used

Ideal time: about 1 min
77Algebra • Functions
Easy

Let be defined by . Consider the following :

1
2

Which of the above is/are correct?

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Evaluate each composition from the inside out, then test each statement with the numbers.

Step-by-step solution

  1. 1
    , so

    Why: Work from the innermost outwards: , then , then .

  2. 2
    , so

    Why: because squares its input; after the first step the chains are the same.

  3. 3
    Statement 1: , true
  4. 4
  5. 5
    Statement 2: , true

    Why: Every value stays inside , so each composition is defined.

Common mistakes

Option A

Gets Statement 1 but mis-evaluates Statement 2, for example taking as .

Option B

Misses that , and so doubts Statement 1, although squaring removes the sign.

Option D

Treats composition as multiplication, for example , and then neither statement checks.

Skills used

Ideal time: about 1.5 min
78Algebra • Functions
Easy

Let and . Then is equivalent to

Options
Show answer & solution

Option C

Approach

Expand both compositions; they are equal for all exactly when their constant terms match. Then read that condition as values of and .

Step-by-step solution

  1. 1

    Why: Put in place of in .

  2. 2

    Why: Put in place of in .

  3. 3

    Why: The -terms already agree (), so the identity holds for all exactly when the constant terms agree.

  4. 4
    and , so the condition is

    Why: Recognise each side as a value: , .

Common mistakes

Option A

and ; this is a different condition, found by putting each function's own slope into it.

Option B

and : each function is applied to its own constant, which is not what the composition gives.

Option D

and , so this says only . That is a stronger condition, not an equivalent one.

Skills used

Ideal time: about 1.5 min
79Differential Calculus • Derivatives
Easy

If , then what is

equal to?

Options
Show answer & solution

Option C

Approach

The limit is the definition of ; differentiate by the chain rule and put .

Step-by-step solution

  1. 1

    Why: This is the derivative of at from first principles.

  2. 2

    Why: Chain rule: derivative of is , times .

  3. 3

    Why: .

Common mistakes

Option A

Forgets the factor in from the inside, giving .

Option B

No natural slip gives ; it is neither the slope nor its reciprocal.

Option D

Drops the minus sign from .

Skills used

Ideal time: about 1 min
80Differential Calculus • Derivatives
Moderate

What is equal to?

Options
Show answer & solution

Option C

Approach

Start from and differentiate it with respect to by the chain rule.

Step-by-step solution

  1. 1

    Why: For first derivatives the reciprocal rule holds.

  2. 2

    Why: is a function of ; to differentiate with respect to , differentiate with respect to and multiply by .

  3. 3

    Why: Derivative of is ; then multiply the powers of .

Common mistakes

Option A

Has the right sign and the power , but takes the reciprocal of as well, as if the second derivative also turned upside down.

Option B

No single natural slip lands here: it takes the reciprocal of , drops the minus sign and also misses the chain-rule factor.

Option D

Assumes the reciprocal rule works for second derivatives: . It holds for first derivatives only.

Skills used

Ideal time: about 1.5 min