Skip to content

Mathematics 2016 (II)

Set A

Questions 61–80 of 120

61Analytical Geometry • Three Dimensions • Plane
Moderate

Consider the following for the next two (02) items that follow :

Let be the image of the point in the plane .

Consider the following :

1
The coordinates of are .
2
is of length more than 8 units.
3
The point is the mid-point of the line segment and lies on the given plane.

Which of the above statements are correct ?

Options
Show answer & solution

Option D

1, 2 and 3

Approach

Find the image by moving from along the normal of the plane, then test each statement with .

Step-by-step solution

  1. 1
    Put in the plane's left side:

    Why: The sign and size of this value tell how far, and on which side, is from the plane.

  2. 2
    Points along the normal from : . On the plane:

    Why: The segment runs along the normal , and gives the foot of the perpendicular .

  3. 3
    The image is twice as far: gives . Statement 1 is correct.

    Why: The plane is halfway between a point and its image.

  4. 4
    , and . Statement 2 is correct.

    Why: is twice the distance of from the plane. Compare squares to avoid decimals.

  5. 5
    Mid-point of : , and . Statement 3 is correct.

    Why: The mid-point must be the foot found in step 2, and it must satisfy the plane.

Common mistakes

Option A

Drops statement 3 after an arithmetic slip in checking in the plane, such as taking as , which gives .

Option B

Needs statement 1 false but statement 3 true. If the mid-point of is , then , so statements 1 and 3 stand or fall together. No natural slip lands here.

Option C

Takes as the distance of from the plane, , forgetting that the image is as far behind the plane as is in front of it.

Skills used

Ideal time: about 3 min
62Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Very easy

Same directions as Q61

Consider the following :

1
The direction ratios of the line segment are .
2
The sum of the squares of direction cosines of the line segment is unity.

Which of the above statements is/are correct ?

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Find from the common setup, read the direction ratios of , and recall the rule for direction cosines.

Step-by-step solution

  1. 1
    : move from along the normal to the plane (), then as far again ().

    Why: The image of a point in a plane lies along the normal, at the same distance on the other side.

  2. 2

    Why: Direction ratios are any numbers proportional to the changes in , , ; dividing by gives . Statement 1 is correct.

  3. 3
    For any line, . Statement 2 is correct.

    Why: Direction cosines are the direction ratios divided by the length, so their squares always add up to .

Common mistakes

Option A

Squares the direction ratios instead of the direction cosines: , and so rejects statement 2.

Option B

Gets and rejects because the numbers differ, forgetting that direction ratios may be scaled.

Option D

Makes both mistakes: rejects for not equal to , and squares direction ratios instead of direction cosines.

Skills used

Ideal time: about 1 min
63Analytical Geometry • Three Dimensions • Direction Cosines and Ratios
Easy

Consider the following for the next two (02) items that follow :

A line passes through the point and is parallel to the planes and .

What are the direction ratios of the line of intersection of the given planes ?

Options
Show answer & solution

Option C

Approach

A line parallel to both planes is perpendicular to both normals, so it runs along the cross product of the normals.

Step-by-step solution

  1. 1
    Normals: ,

    Why: The coefficients of , , in a plane's equation give its normal.

  2. 2
    The line is perpendicular to and to , so it is along

    Why: Parallel to a plane means perpendicular to its normal. The only direction perpendicular to two non-parallel vectors is their cross product.

  3. 3

    Why: Expand the determinant along its first row; note the minus sign on the term.

  4. 4
    Multiply by : direction ratios

    Why: Direction ratios can be scaled by any non-zero number, so the option's form is the same direction.

Common mistakes

Option A

Drops the minus sign on the term of the determinant: , which scales to .

Option B

Takes the term in the wrong order, , giving , which scales to .

Option D

Takes the term in the wrong order, , giving , which scales to .

Skills used

Ideal time: about 2 min
64Analytical Geometry • Three Dimensions • Straight Line in Space
Very easy

Same directions as Q63

What is the equation of the line ?

Options
Show answer & solution

Option A

Approach

The direction of is the cross product of the two normals; write the line through with that direction.

Step-by-step solution

  1. 1
    is parallel to both planes, so it is along with ,

    Why: A line parallel to a plane is perpendicular to its normal; perpendicular to two normals means along their cross product.

  2. 2
  3. 3
    Through :

    Why: Symmetric form: subtract the point's coordinates on top, put the direction ratios below.

Common mistakes

Option B

Adds the coordinates of instead of subtracting them, so the line passes through , not .

Option C

Takes the term of the cross product in the wrong order, getting , and writes its negative ; this is not perpendicular to : .

Option D

Drops the minus sign on the term, getting ; check: , so it is not parallel to the first plane.

Skills used

Ideal time: about 55 s
65Vector Algebra • Dot Product
Easy

Consider the following for the next two (02) items that follow :

Let , and , where is parallel to and is perpendicular to .

What is equal to ?

Options
Show answer & solution

Option A

Approach

Write and take the dot product of with , so that drops out.

Step-by-step solution

  1. 1
    , so

    Why: Parallel to means a multiple of .

  2. 2

    Why: is perpendicular to , so .

  3. 3
    and
  4. 4
    , so

Common mistakes

Option B

Inverts the multiplier: instead of .

Option C

Would need ; no natural slip gives that, since .

Option D

Would need , the reciprocal of ; no natural route gives it.

Skills used

Ideal time: about 1.5 min
66Vector Algebra • Dot Product
Very easy

Same directions as Q65

If , then which of the following equations is/are correct ?

1
2

Select the correct answer using the code given below :

Options
Show answer & solution

Option D

Neither 1 nor 2

Approach

Find , subtract it from to get , then test both equations.

Step-by-step solution

  1. 1

    Why: The part of along ; here and .

  2. 2

    Why: The perpendicular part is what is left of . So , , .

  3. 3
    . Statement 1 is wrong.
  4. 4
    . Statement 2 is wrong.

Common mistakes

Option A

Would need ; no natural slip gives it. The is the part of , which stays in as , not as .

Option B

means , which is the -component of . Reading as lands here.

Option C

Needs both equations true; with neither holds, and no single slip makes both hold.

Skills used

Ideal time: about 1 min
67Vector Algebra • Dot Product
Very easy

Consider the following for the next two (02) items that follow :

Let , and be three vectors such that , and , and .

What is equal to ?

Options
Show answer & solution

Option B

Approach

Square both sides of ; the sum of dot products appears.

Step-by-step solution

  1. 1

    Why: The square of the length of a sum, written with dot products, brings in exactly the sum asked for.

  2. 2
    , where is the sum asked for

    Why: The left side is .

  3. 3
    , so

Common mistakes

Option A

Forgets the factor in front of the dot products and stops at .

Option C

Assumes the dot products cancel because the vectors add to zero; they do not, since every pair meets at an obtuse angle.

Option D

Moves across without changing its sign: .

Skills used

Ideal time: about 1.5 min
68Vector Algebra • Dot Product
Very easy

Same directions as Q67

What is the angle between and ?

Options
Show answer & solution

Option C

Approach

Write , square its length to get , then the angle.

Step-by-step solution

  1. 1
    , so

    Why: Only and are wanted, so remove using the given sum.

  2. 2
  3. 3
  4. 4

Common mistakes

Option A

Gets correctly but reads it as .

Option B

Would need , that is ; no natural slip gives it.

Option D

is not a standard-angle value that any slip in this working produces.

Skills used

Ideal time: about 1 min
69Vector Algebra • Dot Product
Easy

In a right-angled triangle , if the hypotenuse , then what is equal to ?

Options
Show answer & solution

Option B

Approach

The right angle is at , since is the hypotenuse. Find each dot product from the angle at that vertex.

Step-by-step solution

  1. 1

    Why: The angle at is , and perpendicular vectors have dot product .

  2. 2

    Why: Both vectors start at , so the angle between them is angle ; in the right triangle, .

  3. 3
    Likewise
  4. 4
    Sum

    Why: Pythagoras' theorem in the right triangle.

Common mistakes

Option A

Gives the hypotenuse instead of its square; a sum of products of two lengths has the size of a length squared.

Option C

Would need the two acute-angle terms to be each, as if were ; no natural slip gives exactly this.

Option D

Keeps only one of the two acute-angle terms and checks on an isosceles right triangle, where .

Skills used

Ideal time: about 2 min
70Vector Algebra • Applications
Easy

A force is applied at the point . What is the moment of the force about the point ?

Options
Show answer & solution

Option C

Approach

The moment about a point is , with drawn from that point to the point where the force acts.

Step-by-step solution

  1. 1

    Why: starts at the point about which the moment is taken and ends at the point of application .

  2. 2

    Why: The order matters: first, then .

  3. 3

Common mistakes

Option A

No natural slip gives this. Reversing the order, , gives , which is not printed.

Option B

No natural slip gives this; using the position vector itself gives , which is not printed either.

Option D

No natural slip in or in the determinant lands on this vector.

Skills used

Ideal time: about 2 min
71Algebra • Functions
Very easy

What is the domain of the function ?

Options
Show answer & solution

Option A

Approach

A square root in the denominator needs the expression under it to be strictly positive; remove the modulus by the sign of .

Step-by-step solution

  1. 1
    Need

    Why: The root needs a number , and the division needs it .

  2. 2
    For : , not allowed

    Why: when .

  3. 3
    For : , allowed

    Why: when , and is positive for negative .

  4. 4
    Domain: , that is

Common mistakes

Option B

Takes as positive for positive ; in fact it is there, and the denominator vanishes.

Option C

A part of the positive numbers, where ; no natural slip gives exactly this interval.

Option D

Also a set of positive numbers, where ; no natural slip gives exactly this interval.

Skills used

Ideal time: about 56 s
72Differential Calculus • Continuity and Differentiability
Very easy

Consider the following in respect of the function

1
does not exist.
2
is differentiable at .
3
is continuous at .

Which of the above statements is/are correct ?

Options
Show answer & solution

Option B

3 only

Approach

Notice ; then judge the limit at , and the corner at , statement by statement.

Step-by-step solution

  1. 1
    Near only the rule applies, so . The limit exists; statement 1 is wrong.

    Why: is not where the rule changes, so put the value in.

  2. 2
    At : , , . Continuous; statement 3 is correct.
  3. 3
    Left derivative at is (slope of ), right derivative is (slope of ). They differ, so is not differentiable at ; statement 2 is wrong.

    Why: The two pieces meet at but with different slopes: a corner, like .

Common mistakes

Option A

Needs the limit at to fail and continuity at to fail. Both pieces give at , and nothing changes at ; no natural slip gives this.

Option C

Takes continuity at to mean differentiability, missing the corner where the slopes and differ.

Option D

Judges the limit of statement 1 at the joint rather than at , and wrongly thinks a joint has no limit.

Skills used

Ideal time: about 1.5 min
73Differential Calculus • Continuity and Differentiability
Very easy

Let where is such that . On which one of the following sets is continuous ?

Options
Show answer & solution

Option A

Approach

Simplify on each side of , and remember that is not defined at at all.

Step-by-step solution

  1. 1
    : ; :

    Why: Remove the modulus by the sign of .

  2. 2
    On each side is constant, so is continuous at every point of

    Why: Near any non-zero point, keeps one constant value.

  3. 3
    , and all contain , where has no value, so cannot be continuous on them

    Why: Continuity at a point needs to be defined there.

Common mistakes

Option B

Sees for and extends it to , missing that is undefined at .

Option C

Sees for and extends it to , missing that is not in the domain.

Option D

Treats as built from continuous pieces and so continuous everywhere, forgetting that the division fails at ; even with a value there, the jump from to would break continuity.

Skills used

Ideal time: about 1 min
74Differential Calculus • Applications of Derivatives
Moderate

Which one of the following statements is correct in respect of the function ?

Options
Show answer & solution

Option B

It has local minimum at .

Approach

Compare with the values of just to the left and right of , using the signs of and .

Step-by-step solution

  1. 1
  2. 2
    For : and , so

    Why: Look at the sign of each factor.

  3. 3
    For : and , so

    Why: Both factors are negative, so their product is positive.

  4. 4
    Near , : a local minimum at

    Why: This is the definition of a local minimum.

Shortcut

Near , is close to , so behaves like , which has a minimum at .

Common mistakes

Option A

Takes near , as if one of the two factors kept its sign; the values beside are positive, so is a minimum, not a maximum.

Option C

Sees that changes sign at and concludes does too, missing that changes sign at the same point.

Option D

Carries over to ; but , and has no greatest value.

Skills used

Ideal time: about 2 min
75Integral Calculus • Area Under Curves
Easy

What is the area bounded by the curves ?

Options
Show answer & solution

Option B

square units

Approach

is the parabola above the -axis together with its mirror image below; find the upper area and double it.

Step-by-step solution

  1. 1
    needs , so ; the curve is and

    Why: A modulus is never negative, and can be either sign.

  2. 2
    Upper half:

    Why: The area between and the -axis.

  3. 3
    Total square units

    Why: The lower half is the mirror image, with the same area.

Common mistakes

Option A

Finds only the area of above the -axis and forgets the mirror half below.

Option C

Takes the area of the rectangle that just holds the region, not the curved region itself.

Option D

Doubles twice: takes as a quarter of the region (it is already a half) and multiplies by .

Skills used

Ideal time: about 1.5 min
76Differential Calculus • Applications of Derivatives
Very easy

Consider the following function for the next two (02) items that follow :

Which of the following statements is/are correct ?

1
is increasing in the interval .
2
is decreasing in the interval .

Select the correct answer using the code given below :

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Read the sign of on each piece.

Step-by-step solution

  1. 1
    On :
  2. 2
    gives , so and is increasing on . Statement 1 is correct.

    Why: A positive derivative throughout an interval means the function rises there.

  3. 3
    On : , so is decreasing. Statement 2 is correct.

Common mistakes

Option A

Rejects statement 2; but has slope all through . No natural slip gives this.

Option B

Writes , which is negative on , and so rejects statement 1.

Option D

Needs both statements rejected; it combines the slip with a wrong verdict on , which no natural slip gives.

Skills used

Ideal time: about 1.5 min
77Differential Calculus • Continuity and Differentiability
Very easy

Same directions as Q76

Which of the following statements are correct ?

1
is continuous at .
2
attains greatest value at .
3
is differentiable at .

Select the correct answer using the code given below :

Options
Show answer & solution

Option A

1 and 2 only

Approach

At the joint , compare the two pieces' values for continuity and their slopes for differentiability; then find the greatest value on each piece.

Step-by-step solution

  1. 1
    ; . Continuous at ; statement 1 is correct.

    Why: Put in both pieces; they meet.

  2. 2
    On , , so the largest value there is . On , . So the greatest value is at ; statement 2 is correct.

    Why: An increasing piece is largest at its right end; the second piece starts at and falls.

  3. 3
    Left derivative at : . Right derivative: . They differ; statement 3 is wrong.

    Why: The pieces meet at a corner.

Common mistakes

Option B

Makes an arithmetic slip in , so the pieces seem not to meet and statement 1 is rejected; and also takes the joint as smooth.

Option C

Takes continuity to give differentiability, and looks for the greatest value only at the endpoints and .

Option D

Takes continuity at to mean differentiability; the slopes and differ.

Skills used

Ideal time: about 1.5 min
78Differential Calculus • Derivatives
Very easy

Consider the following for the next three (03) items that follow :

Let .

What is equal to when ?

Options
Show answer & solution

Option A

Approach

For , both moduli open with a plus sign; simplify before differentiating.

Step-by-step solution

  1. 1
    : and

    Why: Both and are positive.

  2. 2
    , so
  3. 3

    Why: A constant has derivative .

Common mistakes

Option B

Uses , true only for , and gives the bracket instead of the derivative of .

Option C

Uses the rule for , , and also drops the inner factor of the chain rule.

Option D

Uses , which holds only for , and differentiates correctly.

Skills used

Ideal time: about 52 s
79Differential Calculus • Derivatives
Very easy

Same directions as Q78

What is equal to when ?

Options
Show answer & solution

Option D

Approach

For , but ; simplify, then differentiate with the chain rule.

Step-by-step solution

  1. 1
    : and

    Why: is positive and is negative.

  2. 2
    , so
  3. 3

    Why: Chain rule: the derivative of the square, times the derivative of the inside, .

Common mistakes

Option A

Opens as , which holds only for , so the bracket becomes and .

Option B

Stops at the bracket and never differentiates .

Option C

Drops the inner factor of the chain rule: .

Skills used

Ideal time: about 1 min
80Differential Calculus • Derivatives
Very easy

Same directions as Q78

Which of the following equations is/are correct ?

1
2

Select the correct answer using the code given below :

Options
Show answer & solution

Option A

1 only

Approach

Open the moduli on each interval to get piece by piece, then test both statements.

Step-by-step solution

  1. 1
    : , so
  2. 2
    : , so
  3. 3
    . Statement 1 is correct.

    Why: falls in the first case and in the second.

  4. 4
    : , a quadratic, so ; on the other two pieces is constant, so

    Why: Each derivative lowers the power by one; a quadratic is gone after three.

  5. 5
    . Statement 2 is wrong.

Common mistakes

Option B

Needs statement 1 rejected, as by forgetting the square ( taken as ), and statement 2 accepted, which no slip gives: every third derivative here is .

Option C

Accepts statement 2, which no slip gives: is on every piece, so the sum is .

Option D

Forgets the square and compares itself: at and at , so rejects statement 1.

Skills used

Ideal time: about 1 min