Skip to content

Elementary Mathematics 2025 (II)

Set A

Questions 81–100 of 100

81Algebra • Polynomial • Factor and Remainder Theorem
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: What is the remainder when is divided by , where is a natural number?

I
is odd.
II
is even.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option D

The Question can be answered even without using any of the Statements

Approach

Split the expression into a multiple of the divisor plus a constant.

Step-by-step solution

  1. 1

    Why: The first two terms are a difference of squares, with and as the two squares.

  2. 2
    , so the remainder is

    Why: The first part is exactly divisible by , and the constant has lower degree than the divisor.

  3. 3
    The remainder is whether is odd or even, so neither statement is needed

    Why: Nothing in the argument used the parity of .

Common mistakes

Option A

Believed the parity of matters, as it would if the divisor were or with a sign change.

Option B

Believed both statements give the answer by testing the divisor with , which only works for odd and is not needed.

Option C

Believed both statements are required, taking the answer to depend on .

Skills used

Ideal time: about 1.5 min
82Arithmetic • Number System
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: The product of a natural number N and the number M written by the same digits of N in the reverse order is . What is the number N?

I
II

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option A

The Question can be answered by using one of the Statements alone, but cannot be answered using the other Statement alone

Approach

List every pair , with product where is reversed, then see which statement narrows the pair to one number.

Step-by-step solution

  1. 1

    Why: Factors of are needed to list the pairs.

  2. 2
    A one-digit gives and , which is not a square. A three-digit needs , giving or , but their reverses are not or . So has two digits

    Why: The product of two numbers with the same number of digits cannot be unless the numbers are close to in size.

  3. 3
    Two-digit pairs: . Other pairs such as and fail because is not the reverse of . So or

    Why: Check each factor pair for the reverse property.

  4. 4
    Statement I: and , so both fit; it does not choose. Statement II: gives

    Why: Test each statement against both candidates.

Common mistakes

Option B

Believed Statement I also decides the number, but the sum is the same for and .

Option C

Believed both statements are needed, but Statement II alone already gives .

Option D

Stopped at one candidate such as and did not notice the product allows two numbers.

Skills used

Ideal time: about 2 min
83Arithmetic • Number System • Divisibility
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: The last digit in the expansion of the number is . What is the value of the digit D?

I
II
is a multiple of .

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option C

The Question can be answered by using both the Statements together, but cannot be answered using either Statement alone

Approach

Find which digits make end in , then test each statement against that set.

Step-by-step solution

  1. 1
    Only the last digit of matters. For the unit-digit cycle length divides , so the last digit of is

    Why: Powers of , , and have cycles of length or , and is a multiple of .

  2. 2
    For the last digit is or ; for it is or -type values, never . So

    Why: Even digits and give an even or a -ending last digit.

  3. 3
    Statement I: leaves or . Statement II: a multiple of leaves or . Neither is unique. Together,

    Why: Intersect the two sets.

Common mistakes

Option A

Believed one statement is enough; leaves both and , and a multiple of leaves both and .

Option B

Believed each statement alone fixes , by testing only one value from each set.

Option D

Believed the condition alone fixes , but four digits () work.

Skills used

Ideal time: about 1.5 min
84Geometry • Triangle • Angles of a Triangle
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: In a triangle ABC, . Is angle A acute?

I
ABC is not an obtuse-angled triangle.
II
Angle C is acute.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option D

The Question can be answered even without using any of the Statements

Approach

Use the angle sum with the given relation to find angle , then see whether angle is forced to be acute.

Step-by-step solution

  1. 1
    , and , so and

    Why: Replace by in the angle sum.

  2. 2
    with , so and is acute

    Why: Two positive angles that add to are each less than .

  3. 3
    The question is settled without either statement

    Why: Both statements only repeat what is already true.

Common mistakes

Option A

Thought one statement is needed to rule out an obtuse .

Option B

Thought either statement alone is needed to rule out an obtuse triangle.

Option C

Thought both statements together are needed to restrict the angles.

Skills used

Ideal time: about 1.5 min
85Geometry • Triangle • Triangle Centres
Easy

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: In a triangle ABC right angled at B, cm. What is the circum-radius of the triangle?

I
cm
II
cm

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option D

The Question can be answered even without using any of the Statements

Approach

In a right-angled triangle the circumcentre is the mid-point of the hypotenuse, so the circum-radius is half of .

Step-by-step solution

  1. 1
    The angle at is , so is a diameter of the circumcircle

    Why: The angle in a semicircle is a right angle, and the converse holds.

  2. 2
    cm

    Why: Only is needed.

Common mistakes

Option A

Thought a leg is needed to find the radius.

Option B

Thought either leg alone is needed.

Option C

Thought both legs are needed together, as for an area.

Skills used

Ideal time: about 45 s
86Mensuration • Plane Figures • Quadrilateral
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: ABCD is a parallelogram with . If the area of the parallelogram is square units, then what is the perimeter of the parallelogram?

I
The lengths of the sides AB and DA are prime numbers.
II
The lengths of the sides are natural numbers each greater than unit.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option B

The Question can be answered by using either Statement alone

Approach

Turn the area into a product of the two side lengths, then see what each statement leaves for the pair of sides.

Step-by-step solution

  1. 1

    Why: The angle lies between the two sides and .

  2. 2
    Statement I: both sides are primes with product , so the sides are and and the perimeter is

    Why: has only one prime factorisation.

  3. 3
    Statement II: both sides are natural numbers greater than with product . The pair is not allowed, so again the sides are and and the perimeter is

    Why: The condition 'greater than ' removes the pair .

Common mistakes

Option A

Thought Statement II does not remove the pair , but 'greater than ' does.

Option C

Thought both statements are needed, not noticing that each alone leaves only and .

Option D

Thought the area alone fixes the perimeter; gives two different perimeters.

Skills used

Ideal time: about 1.5 min
87Geometry • Circle • Chords
Very easy

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: AB and CD are chords of a circle intersecting at P. If square units, then what is equal to?

I
units
II
units

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option D

The Question can be answered even without using any of the Statements

Approach

Two chords meeting inside a circle have equal products of their segments, so the value is already known.

Step-by-step solution

  1. 1

    Why: Intersecting chords theorem.

  2. 2
    The statements give single lengths, which are not needed

    Why: The product is fixed by the theorem.

Common mistakes

Option A

Thought one length is needed to divide by.

Option B

Thought either length is needed.

Option C

Thought both lengths are needed together.

Skills used

Ideal time: about 30 s
88Geometry • Quadrilateral
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: In a quadrilateral ABCD, units, units, units, units. What is the length of diagonal BD?

I
The length of BD is an integer greater than .
II
The length of BD is an even integer.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option B

The Question can be answered by using either Statement alone

Approach

Use the triangle inequality in triangles and to bound , then see what each statement leaves.

Step-by-step solution

  1. 1
    Triangle : , so

    Why: The third side lies between the difference and the sum of the other two.

  2. 2
    Triangle : , so

    Why: Same rule with sides and .

  3. 3
    Both hold, so , and the integers are and

    Why: Take the common range.

  4. 4
    Statement I: an integer greater than gives . Statement II: an even integer in the range gives . Each alone fixes

    Why: Test each statement on and .

Common mistakes

Option A

Thought only one statement narrows to a single value.

Option C

Thought both are needed, not noticing that each statement alone gives .

Option D

Thought the sides alone give one value of , but two integers and fit.

Skills used

Ideal time: about 1.5 min
89Mensuration • Plane Figures • Triangle
Hard

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: ABC is an isosceles triangle with units. If the area of the triangle is square units, then what is the length of the base BC?

I
The length of BC is an even integer.
II
The height of the triangle is greater than the length of half of the base.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option A

The Question can be answered by using one of the Statements alone, but cannot be answered using the other Statement alone

Approach

Find all values of the base from the area, then test each statement.

Step-by-step solution

  1. 1
    Let the height be and half the base be . Then and

    Why: The apex perpendicular bisects the base, and area .

  2. 2
    The pairs are and , since and

    Why: Pythagoras with a product of gives these two.

  3. 3
    So or . Both are even, so Statement I does not decide

    Why: An even-integer condition holds for both.

  4. 4
    Statement II: gives , and

    Why: This picks one of the two pairs.

Common mistakes

Option B

Thought Statement I picks one base, but both and are even.

Option C

Thought both statements are needed, not noticing that Statement II alone gives .

Option D

Found one pair and stopped, missing the second isosceles triangle with base .

Skills used

Ideal time: about 2 min
90Geometry • Quadrilateral • Parallelogram
Moderate

A Question is given followed by two Statements I and II. Consider the Question and the Statements.

Question: The diagonals of a rhombus ABCD are in the ratio . Is one of the diagonals equal to side of the rhombus?

I
The sum of the diagonals cm.
II
The length of a side cm.

Which one of the following is correct in respect of the above Question and the Statements?

Options
Show answer & solution

Option D

The Question can be answered even without using any of the Statements

Approach

Write the diagonals as and . Half of each diagonal and the side form a right triangle, so the side can be found without any statement.

Step-by-step solution

  1. 1
    Half-diagonals are and , and the diagonals cross at right angles

    Why: The diagonals of a rhombus bisect each other at right angles.

  2. 2
    , so side

    Why: Pythagoras in the right triangle formed by half the diagonals.

  3. 3
    The diagonals are and , and the side is ; neither diagonal equals for any

    Why: Compare and with .

Common mistakes

Option A

Thought a statement is needed to fix .

Option B

Thought either statement fixes , so the diagonals are known.

Option C

Thought both statements are needed.

Skills used

Ideal time: about 1.5 min
91Statistics • Median
Very easy

Which measure of central tendency is least affected by the presence of extreme observations in the data?

Options
Show answer & solution

Option D

Median

Approach

A measure that depends on position rather than value is not moved by extreme observations.

Step-by-step solution

  1. 1
    The median is the middle value, so changing the largest value does not change it

    Why: Mean, harmonic mean and geometric mean all use every value.

Common mistakes

Option A

The arithmetic mean uses every value, so one extreme value moves it.

Option B

The harmonic mean uses the reciprocals of all values, so a very small value changes it a lot.

Option C

The geometric mean multiplies all values, so one extreme value changes it.

Skills used

Ideal time: about 20 s
92Statistics • Mean
Very easy

To find the average ratio like price/unit, work done/hour, kilometre/hour under certain conditions, the suitable measure of central tendency applicable is

Options
Show answer & solution

Option C

harmonic mean

Approach

Averaging rates such as price per unit or distance per hour, over equal amounts of the bottom unit, needs the reciprocal-based mean.

Step-by-step solution

  1. 1
    The harmonic mean is the reciprocal of the average of reciprocals; it is the correct average for rates

    Why: Rates are ratios of two quantities, and the harmonic mean keeps the total consistent.

Common mistakes

Option A

The arithmetic mean works for a quantity, not for a rate over unequal bases.

Option B

The geometric mean is used for growth ratios and index numbers, not for rates.

Option D

The mode is the most frequent value and is not an average of rates.

Skills used

Ideal time: about 20 s
93Statistics • Mean
Moderate

The frequency distribution of marks of candidates in a particular examination is as follows:

MarksNumber of Candidates
More than 10100
More than 2075
More than 3060
More than 4040

What are the average marks of the candidates?

Options
Show answer & solution

Option D

Approach

Turn the 'more than' counts into class frequencies, then find the mean with class mid-points.

Step-by-step solution

  1. 1
    Classes: -: ; -: ; -: ; -:

    Why: Each class frequency is the difference of two neighbouring 'more than' counts; the last one is the count itself, with the top class ending at .

  2. 2
    Mid-points:

    Why: Half of the sum of each class's ends.

  3. 3

    Why: Multiply each frequency by its mid-point.

  4. 4

    Why: Divide by the total number of candidates.

Common mistakes

Option A

No natural route leads to .

Option B

No natural route leads to .

Option C

Used the lower limits as the values, which gives , not ; no natural route leads to .

Skills used

Ideal time: about 1.5 min
94Statistics • Mean
Very easy

The arithmetic mean of observations is . If is multiplied to each observation, then what will be the new arithmetic mean?

Options
Show answer & solution

Option B

Approach

Multiplying every observation by a constant multiplies their total, and so their mean, by the same constant.

Step-by-step solution

  1. 1
    New total old total, and the count is unchanged

    Why: Each observation becomes .

  2. 2
    New mean

    Why: Total divided by the same observations.

Common mistakes

Option A

Added to and multiplied by something else; does not follow from a natural route.

Option C

Thought the mean does not change when every observation is multiplied.

Option D

Divided by to get , mixing up the count and the multiplier.

Skills used

Ideal time: about 20 s
95Statistics • Mean • Weighted Mean
Easy

A distribution consists of components with frequencies , and having their means , and respectively. What is the mean of the combined distribution?

Options
Show answer & solution

Option A

Approach

Combine the three components by weighting each mean with its frequency.

Step-by-step solution

  1. 1

    Why: Each component contributes its frequency times its mean.

  2. 2

    Why: Total frequency.

  3. 3

    Why: Divide the combined total by the combined frequency.

Common mistakes

Option B

Took the simple average of the means, , and then rounded wrongly.

Option C

No natural route leads to .

Option D

Took the middle mean as the answer.

Skills used

Ideal time: about 1 min
96Statistics • Median
Very easy

Which one of the following is a positional average?

Options
Show answer & solution

Option B

Median

Approach

A positional average is found from the place of a value in the ordered data, not from arithmetic on all values.

Step-by-step solution

  1. 1
    The median is the middle item of the ordered data, so it is defined by position

    Why: Position in the sorted list decides it.

  2. 2
    The mean and the geometric mean are calculated from all values, so they are not positional

    Why: They are mathematical averages.

Common mistakes

Option A

The arithmetic mean is calculated from all values, so it is not positional.

Option C

The mode is also described as a positional average in some books, because it is read off the data by frequency rather than computed from every value.

Option D

The geometric mean is calculated from all values, so it is not positional.

Skills used

Ideal time: about 20 s
97Statistics • Median
Moderate

For the following two (02) items:

The following data represent the distance covered (in metres) by two groups of athletic children. It is known that the median distance in the first group is metres while the mean distance in the second group is metres. Some frequencies in both the groups are missing:

Distance ClassFirst GroupSecond Group
0-5u3u
5-10v2v
10-151140
15-205250
20-257530
25-302228

What is the value of ?

Options
Show answer & solution

No option is correct

Approach

Use the median of the first group to find . Then see whether the mean of the second group fixes and to whole numbers.

Step-by-step solution

  1. 1
    First group total: . The class - holds the median since lies in it. Frequency before it:

    Why: Cumulative frequency up to the class before the median class.

  2. 2

    Why: Use the median formula for grouped data.

  3. 3

    Why: Simplify.

  4. 4
    The second group mean gives with , so and , which are not whole numbers

    Why: Use class mid-points and frequencies .

Skills used

Ideal time: about 2.5 min
98Statistics • Mean
Moderate

Same directions as Q97

What is the value of ?

Options
Show answer & solution

No option is correct

Approach

Use from the median of the first group, then use the mean of the second group to find .

Step-by-step solution

  1. 1
    From the first group's median:

    Why: The median class - and the median give this.

  2. 2
    Second group: and

    Why: Frequencies with mid-points .

  3. 3

    Why: Set the mean equal to .

  4. 4
    With : , so

    Why: Substitute and solve.

Skills used

Ideal time: about 2.5 min
99Statistics • Median
Moderate

For the following two (02) items:

Consider the following distribution having median value :

MarksNumber of Students
Less than 105
Less than 2030
Less than 3030 + k
Less than 4048 + k
Less than 5055 + k

What is the value of ?

Options
Show answer & solution

Option C

Approach

Turn the 'less than' counts into class frequencies, then put the median into the grouped-median formula and solve for .

Step-by-step solution

  1. 1
    Frequencies: -: ; -: ; -: ; -: ; -: . Total

    Why: Each frequency is the difference of two neighbouring cumulative counts.

  2. 2
    The median is in -, and the cumulative frequency before it is

    Why: Check that the class is the median class.

  3. 3

    Why: Put , , and in the median formula and solve.

Common mistakes

Option A

No natural route leads to .

Option B

No natural route leads to .

Option D

No natural route leads to .

Skills used

Ideal time: about 2 min
100Statistics • Mean
Moderate

Same directions as Q99

What is the mean of the distribution?

Options
Show answer & solution

Option D

Approach

Use from the previous item, rebuild the class frequencies and compute the mean with class mid-points.

Step-by-step solution

  1. 1
    With : frequencies and

    Why: Differences of the cumulative counts .

  2. 2
    Mid-points

    Why: Half of each class's ends.

  3. 3

    Why: Multiply each frequency by its mid-point.

  4. 4

    Why: Divide by .

Common mistakes

Option A

No natural route leads to .

Option B

No natural route leads to .

Option C

No natural route leads to .

Skills used

Ideal time: about 1.5 min