Skip to content

Elementary Mathematics 2022 (I)

Set A

Questions 61–80 of 100

61Geometry • Circle • Chords
Moderate

Consider the following statements :

1
If two chords and of a circle are equal, then the centre of the circle lies on the angle bisector of angle .
2
If two concentric circles are intersected by a line at , , and respectively, then .

Which of the above statements is/are correct?

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Use that the perpendicular from the centre bisects a chord.

Step-by-step solution

  1. 1
    Statement 1: equal chords are at equal distances from the centre, since with the same and .

    Why: Distance from the centre depends only on chord length.

  2. 2
    The centre is equidistant from the lines and , so it lies on a bisector of the angle at (inside the angle, the bisector of ).

    Why: Points equidistant from two lines through lie on an angle bisector.

  3. 3
    Statement 2: the perpendicular from the common centre to the line bisects both chords, so and share a midpoint .

    Why: The common perpendicular foot is the midpoint of both chords.

  4. 4
    Then and , so . With the order : and , so .

    Why: Equal and added to the same give equal sums. Both statements hold.

Common mistakes

Option A

Judging Statement 2 false by comparing with or with instead of with .

Option B

Rejecting Statement 1 because the centre may lie on the other bisector. It lies inside the angle.

Option D

No plausible route.

Skills used

Ideal time: about 1.5 min
62Geometry • Circle • Chords
Very easy

A circle of radius has a chord of length . What is the length of the perpendicular drawn from the centre of the circle to the chord?

Options
Show answer & solution

Option D

Approach

Half the chord and the radius form a right triangle with the distance.

Step-by-step solution

  1. 1
    Half the chord is cm.

    Why: The perpendicular from the centre bisects the chord.

  2. 2
    , so cm.

    Why: Right triangle with hypotenuse the radius , one leg .

Common mistakes

Option A

No plausible route.

Option B

No plausible route.

Option C

No plausible route.

Skills used

Ideal time: about 30 s
63Mensuration • Solids
Moderate

The surface area of a cube of length is equal to the surface area of a sphere of radius . Consider the following statements :

1
2
The volume of the cube is greater than the volume of the sphere.

Which of the above statements is/are correct?

Options
Show answer & solution

Option D

Neither 1 nor 2

Approach

Equate surface areas and compare numerically.

Step-by-step solution

  1. 1
    Equal surface areas: , so and .

    Why: and .

  2. 2
    Statement 1: , so it is false.

    Why: Compare with .

  3. 3
    Statement 2: cube volume ; sphere volume . The cube volume is smaller, so Statement 2 is false.

    Why: Use .

Common mistakes

Option A

Rounding up to , giving and treating it as greater.

Option B

Believing the cube must hold more because its side is longer.

Option C

Accepting both from the two errors above.

Skills used

Ideal time: about 1.5 min
64Mensuration • Solids • Cone
Easy

The radius and height of a right circular cone are in the ratio . If the volume of the cone is , then what is the height of the cone? (Take )

Options
Show answer & solution

Option D

Approach

Use a common factor for radius and height.

Step-by-step solution

  1. 1
    Let , .

    Why: Introduce a common factor for the ratio.

  2. 2
    .

    Why: Cone volume with ; the cancels.

  3. 3
    , so cm.

    Why: Cube root of .

Common mistakes

Option A

No plausible route.

Option B

Giving with , from reading wrongly.

Option C

No plausible route.

Skills used

Ideal time: about 1 min
65Mensuration • Solids • Cylinder
Easy

A cylindrical pipe has inner diameter of . Water flows through it at a rate of . What is the speed of water in ? (Take )

Options
Show answer & solution

Option B

Approach

Flow volume equals cross-section area times distance moved.

Step-by-step solution

  1. 1
    Pipe cross-section area cm.

    Why: Radius is half of the diameter cm.

  2. 2
    Water per minute litres cm.

    Why: litre cm.

  3. 3
    Water column length per minute cm m.

    Why: Volume of a cylinder is area length.

  4. 4
    Speed m/min m/h km/h.

    Why: Multiply by and divide by .

Common mistakes

Option A

No plausible route.

Option C

No plausible route.

Option D

No plausible route.

Skills used

Ideal time: about 1 min
66Mensuration • Recasting and Melting
Moderate

A spherical ball of lead in diameter is melted and recast into three spherical balls. The diameters of the balls are , and . Which one of the following is correct?

Options
Show answer & solution

Option B

Approach

Equate volumes of the original and the three balls.

Step-by-step solution

  1. 1
    Volume is conserved: .

    Why: Spheres have volume , so volumes are in the ratio of cubes of diameters.

  2. 2
    .

    Why: Subtract.

  3. 3
    and ; lies between, so .

    Why: Cube the end values to locate .

Common mistakes

Option A

Estimating as about by rounding.

Option C

No plausible route.

Option D

No plausible route.

Skills used

Ideal time: about 1.5 min
67Mensuration • Plane Figures • Quadrilateral
Moderate

A rectangle of length and breadth is split into two squares each of area and two rectangles each of area . Consider the following statements :

1
is always greater than .
2
can be .

Which of the above statements is/are correct?

Options
Show answer & solution

Option B

2 only

Approach

Look for every way to cut the rectangle into two equal squares and two equal rectangles.

Step-by-step solution

  1. 1
    One layout: two squares of side (area ) on a diagonal and two rectangles (). Here .

    Why: Two squares of side along the breadth need .

  2. 2
    Another layout: two squares of side side by side across the length , with the remaining strip cut into two rectangles: , .

    Why: Squares along the length need .

  3. 3
    Statement 1 is false (); Statement 2 is true ().

    Why: One counter-example kills "always"; one layout shows "can be".

Common mistakes

Option A

Using only the first layout, where .

Option C

Accepting Statement 1 from the first layout and Statement 2 from the second.

Option D

Rejecting both by finding only the first layout.

Skills used

Ideal time: about 1.5 min
68Mensuration • Plane Figures • Quadrilateral
Easy

A square sheet is formed by joining identical square sheets of same size. If the length of the diagonal of the bigger square sheet so formed is , then what is the side length of a smaller square sheet?

Options
Show answer & solution

Option C

Approach

Find the big side in terms of then use the diagonal.

Step-by-step solution

  1. 1
    Let the small side be . The big square has area , so its side is .

    Why: Joining equal squares into one square gives area times the small area.

  2. 2
    Diagonal .

    Why: Diagonal of a square is side.

  3. 3
    .

    Why: Solve for .

Common mistakes

Option A

Treating the diagonal as the side of the big square.

Option B

Dividing by instead of .

Option D

Multiplying instead of dividing by .

Skills used

Ideal time: about 50 s
69Mensuration • Solids • Cylinder
Moderate

A rectangular sheet is of length and breadth . If is the volume of the cylinder formed by rolling the sheet along its breadth and is the volume of the cylinder formed by rolling the sheet along its length, and , then which one of the following is correct?

Options
Show answer & solution

Option C

Approach

Write both volumes using the circumference as the rolled side.

Step-by-step solution

  1. 1
    Rolling so that the breadth forms the circumference: , height . .

    Why: Cylinder volume with .

  2. 2
    Rolling the other way: circumference , height : .

    Why: Same with roles swapped.

  3. 3
    .

    Why: Cancel and .

Common mistakes

Option A

No plausible route.

Option B

No plausible route.

Option D

No plausible route.

Skills used

Ideal time: about 1.5 min
70Mensuration • Recasting and Melting
Moderate

A tall cylindrical container with circular base of radius contains a good quantity of water. Metal balls each of radius are immersed in it. How many balls are required to raise the water level by ?

Options
Show answer & solution

Option C

Approach

Volume of water rise equals the total volume of the balls.

Step-by-step solution

  1. 1
    Volume of water raised cm.

    Why: The rise is a cylinder of radius and height .

  2. 2
    One ball: .

    Why: Sphere volume.

  3. 3
    Number .

    Why: Displaced water equals the volume of the balls.

Common mistakes

Option A

Slipping a decimal place in .

Option B

No plausible route.

Option D

No plausible route.

Skills used

Ideal time: about 1.5 min
71Mensuration • Plane Figures • Triangle
Easy

An equilateral triangular sheet is formed by joining equilateral triangular sheets each of area . What is the height of the bigger triangular sheet?

Options
Show answer & solution

Option A

Approach

Find the area of the big sheet from the nine small ones, get its side from the equilateral-triangle area formula, then take the height.

Step-by-step solution

  1. 1
    Area of big sheet

    Why: Nine equal sheets are joined without overlap, so their areas add.

  2. 2

    Why: Use the area formula of an equilateral triangle and solve for the side .

  3. 3

    Why: The height of an equilateral triangle is times its side.

Shortcut

Nine joined sheets give a similar triangle with side times the small one, so the side is cm.

Common mistakes

Option B

Gave the side cm as the height.

Option C

Used height instead of , which gives .

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 1.5 min
72Mensuration • Plane Figures • Quadrilateral
Easy

A farmland is in the shape of a rhombus. The perimeter of the land is and the length of one of the diagonals is . The land is divided into four equal parts. What is the area of each part?

Options
Show answer & solution

Option A

Approach

Find the second diagonal using the side and the given diagonal, get the rhombus area from the diagonals, then divide by four.

Step-by-step solution

  1. 1
    Side

    Why: All four sides of a rhombus are equal.

  2. 2
    Half of given diagonal ;

    Why: The diagonals of a rhombus cross at right angles and bisect each other, so a side and two half-diagonals form a right triangle.

  3. 3
    Other diagonal ; Area

    Why: The diagonals of a rhombus are perpendicular, so area is half their product.

  4. 4
    Each part

    Why: Four equal parts share the area equally.

Common mistakes

Option B

No common slip leads to this value; it is not reachable from the standard route.

Option C

Divided into two parts instead of four.

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 1.5 min
73Geometry • Quadrilateral • Trapezium
Easy

is a trapezium in which is parallel to . Let and be the midpoints on and respectively. If and , then what is the value of ?

Options
Show answer & solution

Option B

Approach

The line joining the midpoints of the slant sides is the average of the parallel sides; use that sum and the given difference to find the product.

Step-by-step solution

  1. 1

    Why: The segment joining the midpoints of the non-parallel sides of a trapezium is parallel to the bases and equal to half their sum.

  2. 2

    Why: Use , so the product follows without finding each side.

Common mistakes

Option A

No common slip leads to this value; it is not reachable from the standard route.

Option C

Took and multiplied, ignoring the difference of .

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 1 min
74Mensuration • Plane Figures • Quadrilateral
Very easy

is a parallelogram with and . If is the acute angle between and , then what is the area of the parallelogram in square cm?

Options
Show answer & solution

Option B

Approach

Split the parallelogram into two equal triangles by a diagonal and use the area formula with the included angle.

Step-by-step solution

  1. 1
    Diagonal splits into two congruent triangles and

    Why: A diagonal of a parallelogram divides it into two triangles of equal area.

  2. 2
    Area of

    Why: The angle lies between sides and , so it is the included angle.

  3. 3
    Area of

    Why: Add the two equal triangle areas.

Common mistakes

Option A

Gave the area of one triangle only, .

Option C

Used for the height, and left out the second triangle.

Option D

Used for the height, giving .

Skills used

Ideal time: about 45 s
75Mensuration • Plane Figures • Triangle
Very easy

If the perimeter of an isosceles right triangle is , then what is its area in square cm?

Options
Show answer & solution

Option A

Approach

Write the perimeter of the isosceles right triangle in terms of a leg, find the leg, and take half the product of the legs.

Step-by-step solution

  1. 1
    Legs , hypotenuse

    Why: The two equal sides meet at the right angle, so the third side is the hypotenuse.

  2. 2
    Perimeter

    Why: Compare with the given perimeter to read off .

  3. 3
    Area

    Why: The two legs are perpendicular, so one is the base and the other the height.

Common mistakes

Option B

No common slip leads to this value; it is not reachable from the standard route.

Option C

Gave and forgot the factor .

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 1 min
76Mensuration • Plane Figures
Moderate

The diagonal of a square is and the area of an equilateral triangle is . Which of the following statements is/are correct?

1
The square and the triangle have the same perimeter.
2
Four times the area of the square is equal to times the area of the triangle.

Select the correct answer using the code given below.

Options
Show answer & solution

Option C

Both 1 and 2

Approach

Find the square's side and the triangle's side, then test each statement with numbers.

Step-by-step solution

  1. 1
    Square: diagonal ; perimeter , area

    Why: The diagonal of a square is its side times .

  2. 2
    Triangle: ; perimeter

    Why: Use the equilateral-triangle area formula to get the side.

  3. 3
    Statement 1: , true

    Why: Compare the two perimeters.

  4. 4
    Statement 2: and , true

    Why: Use on the right side.

Common mistakes

Option A

Judged statement 2 false after slipping on (for example giving ).

Option B

Judged statement 1 false, for example after mixing up the area and the perimeter of the triangle.

Option D

Rejected both statements after an arithmetic slip in each.

Skills used

Ideal time: about 1.5 min
77Geometry • Triangle • Medians and Centroid
Moderate

Consider the following statements :

1
The sum of any two sides of a triangle is less than twice the median drawn to the third side.
2
The perimeter of a triangle is greater than the sum of the three medians.

Which of the above statements is/are correct?

Options
Show answer & solution

Option B

2 only

Approach

Test each statement against the triangle inequality and the known bounds on the sum of the medians.

Step-by-step solution

  1. 1
    Statement 1: with median to ,

    Why: Extend to with ; then is a parallelogram, , and by the triangle inequality. So the sum of the two sides is greater than twice the median, and statement 1 is false.

  2. 2
    Statement 2:

    Why: Adding and its two cousins gives the sum of the medians less than the perimeter, so statement 2 is true.

Common mistakes

Option A

Reversed the inequality in statement 1 and so accepted it.

Option C

Accepted statement 1 as stated without checking the direction of the inequality.

Option D

Rejected statement 2, thinking the medians could add to more than the perimeter.

Skills used

Ideal time: about 1.5 min
78Geometry • Triangle • Congruence
Easy

Let , and be the midpoints of the sides , and respectively of a triangle . Triangle is congruent to which of the following triangles?

1
2
3

Select the correct answer using the code given below.

Options
Show answer & solution

Option D

1, 2 and 3

Approach

Use the midpoint theorem to show every corner triangle has the same three side lengths as .

Step-by-step solution

  1. 1
    , ,

    Why: The segment joining midpoints of two sides is half of the third side.

  2. 2
    : , , ; the sides match , , in some order

    Why: Each corner triangle has half of each side of , so its sides are the same three lengths.

  3. 3
    The same holds for and , so is congruent to all three (SSS)

    Why: Equal three sides in order gives congruence.

Common mistakes

Option A

Checked only and stopped.

Option B

Left out , though it is congruent too.

Option C

Checked only and stopped.

Skills used

Ideal time: about 1.5 min
79Geometry • Triangle • Angles of a Triangle
Easy

In a triangle , and is produced to such that , then what is equal to?

Options
Show answer & solution

Option B

Approach

Use the straight line at to find , then the equal base angles and the angle sum.

Step-by-step solution

  1. 1

    Why: , , lie on a straight line, so and add to .

  2. 2

    Why: Equal sides face equal angles.

  3. 3

    Why: The three angles of a triangle add to .

Common mistakes

Option A

No common slip leads to this value; it is not reachable from the standard route.

Option C

Took as the base angle itself, giving .

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 1 min
80Geometry • Triangle • Pythagoras Theorem
Easy

is a triangle right angled at with . If , then what is equal to?

Options
Show answer & solution

Option B

Approach

Use the sine ratio to find the angles, then read off .

Step-by-step solution

  1. 1

    Why: is opposite and is the hypotenuse.

  2. 2

    Why: The angle with sine is .

  3. 3

    Why: The acute angles of a right triangle add to .

Common mistakes

Option A

No common slip leads to this value; it is not reachable from the standard route.

Option C

No common slip leads to this value; it is not reachable from the standard route.

Option D

No common slip leads to this value; it is not reachable from the standard route.

Skills used

Ideal time: about 45 s